Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

In line filter on Air Comprerssor

Posts

In line filter on Air Comprerssor

#1

In line filter on Air Comprerssor

Jennifer@Indy.USA

>Hey all,

I am wanting to put an in line filter on my AC in order to help in moisture control into some of the pneumatic tools I use on use on my turnings. I thought that the little filter I bought just connected onto the regulator at the AC, but apparently I need a short line coming form the AC...then they say to attach this filter to a solid surface such as the wall...and then run the extended line to the tools from there. So I'm at Lowes yesterday, and I don't see any sort of short air hose for the filter extension. Does everybody just make one of these out of a piece of short hose and use those coupling do-dads? The tapered thing that fits inside the hose to seal it? I fear those would leak...they always do when using them to splice garden hose. Perhaps I'm missing the entire explanation that came in the filter box...it was pretty sparse. Of course I just tossed my old air hose and the trash pick up was yesterday.

Any help would be most appreciated. Thanks!

Jen

Re: In line filter on Air Comprerssor

#2

Re: In line filter on Air Comprerssor

Kneale Brownson in Northern MI

>Yes, they make hose barbs specifically for splicing air hose. You get them for your hose inside diameter. You want barbs with the thread that fits your air connectors. I usually add a hose clamp to the outside. I save old air hose just for making short pigtails. Of course, I save everything.

Re: In line filter on Air Comprerssor

#3

Re: In line filter on Air Comprerssor

Mark Mandell - Gone Round In Jersey

>A "coalescing" filter can be hooked into your flexible lines with hose barb fittings, but you MUST use hose clamps as well to keep the pressure from blowing the connection apart. Note, however, the a small "in-line" filter will do little or nothing to remove water from your airstream; those small in-line jobs are for dust and are a pain to drain anything that does condense. A wall mounted regulator/filter (non-lubricating type) unit with a bowl and drain will do much more. It also gives you the ability to fine tune your working air pressure.

You can make the biggest difference in the amount of water(oil) vapor in the airstream by keeping your compressor's storage tank as dry as possible. That means manually draining the condensed water in the tank often (sometimes daily in heavy use or humid summer air) or putting an auto drain on the tank to do it for you.

If you need a specific rec. for your particular application, drop me an e-mail.

mm

Re: In line filter on Air Comprerssor

#4

I'll Bring An Air Hose 2 5ive Barns

George@Colonel's Workshop-Havertown PA

>Hey Jennifer,

I have 25 feet of slightly used air hose from my old compressor which needs a home. If it can help, its yours.

George

Re: In line filter on Air Comprerssor

#5

Hey, ya hoser!

Jennifer@Indy.USA

>:)

I'm kidding George! I hope to have found a piece by then, but I'll let you know, and thanks! Apparently Harbor Frieght sells 3-4' pieces just for this. I just found this out today.

I can't wait to see you George!!!

Jen

Re: In line filter on Air Comprerssor

#6

Thanks all

Jennifer@Indy.USA

>I appreciate all the help.

Jen :)

Re: In line filter on Air Comprerssor

#7

Habor Freight has them $2.00

Dustmaker Mike

>