Birdseye Maple
cutdatout
>Trying to find out the value of a 6 foot and 14'' diameter piece of Birdseye Maple. Any ideas would be appreciated, before I purchase it.
Knowledge You Can Build On — Est. 1998
Birdseye Maple
cutdatout
>Trying to find out the value of a 6 foot and 14'' diameter piece of Birdseye Maple. Any ideas would be appreciated, before I purchase it.
personally I would have it sawn first.....
SanMan
>....why pay for supposed "birds eye" wood if in fact it is not?
A 14" diam log isnt going to yeild much usable lumber either.
At 6' length using the Doyle rule, your looking at 38 bdft of lumber.
I think 50 bucks would be my upper most offer...sight unseen.
YMMV
Re: personally I would have it sawn first.....
cutdatout
>Thanks, I actually had a small sample cut from both ends. It is Birdseye and with good uniform colour, and will yield what I am looking to use it for, but thanks for the input.
It's going to cost you...
Ellis Walentine, Host
>...fifty bucks or more to get it sawn and thrown into a kiln, so you are already into it for about $1.25 per foot. Figure in the value of your time to hustle the deal, get the log to a mill (or do you own one?), then to a kiln, then back to your shop or wherever -- maybe a day's worth of your time? Divide that amount by 38 bf and add it to the cost -- probably another $6 -10 per foot.
Now, you can buy decent birdseye for $5 per board foot if you're lucky, $8 if you aren't. If you're willing to write off your labor to the adventure, you might be willing to pay a couple bucks a foot for the wood, if, as you say, it is all going to yield the birdseye figure you are looking for. Trouble is, birdseye is rarely shot all the way through a log, so for through-and-through cut lumber, you probably aren't going to have the figure you want in every board, or even in all parts of any board.
I'd think twice about offering more than $50 for the log. You'd be better off buying lumber of known quality.
Ellis Walentine, Host