Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Anyone Here Ever Built A Pool Table?

Posts

Anyone Here Ever Built A Pool Table?

#1

Anyone Here Ever Built A Pool Table?

Ryan Dicker in Renfrew, Ontario

>Hi,

I was just curious to know if anyone has any experience building a pool table from scratch or knows someone who manufactures them.

I have done a good deal of searching online and have checked just about all of the resources available, but what is hindering me is finding out where I can purchase the slate from (Preferably a Canadian supplier) at a good price. I have also considered finding a used table and taking the slate out, but it is usually pretty expensive to purchase the table if you are just taking the slate from it.

Once you have the slate, the rest of the supplies are pretty easy to come by and the woodworking is actually pretty easy.

So if anyone has any advice or knows where I can get some slate, let me know. I have pretty well seen all of the articles that are online with regards to the construction, (with the exception of the one that appeared in a 1989 edition of Fine Woodworking) but if you have any resources other than those readily available online, I would love to see them.

Thanks,

Ryan

Re: Anyone Here Ever Built A Pool Table?

#2

Re: Anyone Here Ever Built A Pool Table?

Dale Stansbery

>See if you can find any pool table dealers that have been in business a long time. They may have slate from old trade ins. They're long gone(I think), but I bought center piece out of a three piece table from a dealer in downtown Columbus Oh., years ago to build a bumper pool table.

Re: Anyone Here Ever Built A Pool Table?

#3

Down here in slate country...

Ellis Walentine, Host

>...we have a bunch of slate quarries with production facilities. One of the big players is Penn Big Bed Slate Co. I have had them make everything from roof slate to wet-bar tops for me. I have no doubt that they can hold the tolerances for a pool table top. Google them.

Ellis Walentine, Host

Re: Anyone Here Ever Built A Pool Table?

#4

Concrete pool table...abit OT

Tom Dunlap in Atlanta

>When I was in college I worked for Abrasive Engineering and Mfg, a company started by former Timesaver engineers. One of the machines that was built was used to surface concrete pool table tops. I talked a bit with the engineers from the pool table company and they said that the cement top was more stable and much cheaper to produce/ship since they could have them made close to where their markets were and not ship slate around.

When the top went through the machine the first time there was a lot of dust that didn't get sucked up. To solve that issue it took some fabricating but they did solve the problem.

Tom

Re: Anyone Here Ever Built A Pool Table?

#5

Re: Anyone Here Ever Built A Pool Table?

Brian Altman

>If you have searched the web you probably saw this site.

http://www.bestbilliard.com/resources/buildtable/wood.cfm

There are some things I would do differently but seemed to be a good basic plan.

I bought 3 pieces of slate from an old dealer that had a couple small chips out of one piece for $40. Was told by the dealer that he uses Bondo to fix them and it works out perfectly. I have to admit the slate has been leaning against a tree for 2 years now waiting for the "right time" to start.

Brian

Re: Anyone Here Ever Built A Pool Table?

#6

Check this site out. *LINK*

Pete Stahl

>The link is for a guy who's making his own arts and craft style pool table. Maybe you could contact him and find out where he is getting his supplies.


Eagle Lake Woodworking

Re: Anyone Here Ever Built A Pool Table?

#7

Donor Table....

Pete Stahl

>I was looking though the post that I got the link from and He said he had a donor table that he'll be using the slate and bumpers from. Maybe you could find a old one with good slate still on it. I would think you could easily get the bumpers and felt without any trouble. I guess you also have to consider what size you're going to make. Keep us updated, doubt I'll ever make one but it's interesting just the same. How about one with claw/ball feet and have the balls be different billiard balls.

Re: Anyone Here Ever Built A Pool Table?

#8

Re: Donor Table....

Ryan Dicker in Renfrew, Ontario

>Thanks to everyone who responded. Greatly appreciated.

I had found a few sources online that provided new slate for not off the wall prices, but the freighting costs across the border would probably put me way over budget.

I am hoping that I'll be able to make a find like Brian did from an old dealer or from someone who has scraped their table and just kept the slate. There are many effective ways of filling chips including bondo, so even if it isn't in the best condition, it would get me started on this project.

Ultimately, this project comes down to cost. Used tables run in the $700-$1000 range and most are in good condition. If I have to buy the slate new, it will cost well over the price of a used one and chances are I would have to cheap out on the other materials to make up the cost. If I get the slate at a good price, I can have a brand new table with good quality materials for about the same price as a used one.

The woodworking in a pool table is not all that difficult from what I have researched. The link that Brian provided from Best Billiards has a "weekend woodworker" who, if you read it through, probably can't tell a dovetail from a miter...and used pretty mediocre tools. He seems to have built a fairly well constructed table without that much difficulty.

I have a full shop to my disposal at my high school that surpasses my needs for this project. Next year will be my final year there however, so I am starting to plan now for a project I can do while I still have the tools and space to work with. I should also note that the lumber is ordered in sizable quantities so the prices are pretty good.

Anyways, I am going to try contacting some table dealers in the area to see if they have some slate lying around. (by the way, I am looking for the slate for a 4x8 table...or smaller) I might also put a few ad's up locally to see if anyone has some laying around in a garage or something.

I'll let you know if I find anything.

Thanks Again!

Ryan

Re: Anyone Here Ever Built A Pool Table?

#9

Re: Anyone Here Ever Built A Pool Table?

Wade

>Several sites have indicated that www.bestbillard.com had the best price on slate. One guy noted that he saved money on shipping by picking up the slate at the trucking company, instead of paying for home delivery. Bestbillards also has an online intro and timeline of building your own table. It is worth a look. www.bestbillard.com/resources/buildtable.cfm

Re: Anyone Here Ever Built A Pool Table?

#10

That's WWing blastphemy!!!

Mark Goodall - ATL - tooljunkie

>Well, not really, but.......

"...Ultimately, this project comes down to cost...."

While I'll admit that things like I build sheds, fences, decks, extensions, etc myself to save cost, if it came down to the cost vs buy for any fine woodworking I did, I'm never build anything.

I'll have to admit that just about everything I build like that would cost me less to buy, but it's the satisfaction and pride to say: I built this myself.

I've got a couple of projects on the go, including a custom Foosball table. Now the 8/4 walnut and 8/4 maple, plus the best hardware available is going to put the cost of materials past the cost of a top of the line Tornado (or other) Foosball table.

But how many people will be able to claim to own, let alone build, a 2" thick solid walnut/maple table.

Don't take what I said personally.... I understand exactly where you're coming from. I just wanted to comment on the make vs buy debate, which is always something that most of us think about.

Happy Woodworking!

Re: Anyone Here Ever Built A Pool Table?

#11

Re: That's WWing blastphemy!!!

Ryan Dicker in Renfrew, Ontario

>Mark, I agree with what you say and I think that's what I was trying to get at. But you know something? If in the end I don't build a pool table....I am probably not going to buy a new/used one either.

I've been sitting here trying to think of something to add to this for five minutes...but it's a hard topic to wrap my head around.....

I'll have to sleep on it.

Anyways,

Thanks again to everyone who responded.

Ryan

Re: Anyone Here Ever Built A Pool Table?

#12

This is probably a bad idea but...

Curly Smith

>Why do you have to use slate? What's wrong with a stable base of 2 sheets of 3/4" cabinet grade plywood, probably topped with laminate to help prevent dents? Or, maybe Corian? Heck, why not sandwich a sheet of MDF between the two sheets of plywood for some additional mass? For that matter, why not get a couple of countertops from the big box store?

I could be wrong (and probably am) but I think the only reason slate is used is that it was the only readily available stable building product in the 1700's. Now it's just the traditional top.