Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Finish question

Posts

Finish question

#1

Finish question

Ray

>I have a friend who is refinishing a gunstock, and he asked a question about using BLO. Someone t6old him it would not dry. Is this correct and should it be sealed with some sort of Polyu after applying? Thanks for the help.

Ray in WNC

Re: Finish question

#2

my experience..highly favorable

Bill Tindal, E.TN

>I have a Win Model 24 that I refinished sometime in the mid 1950's with linseed oil and I have hunted every year since with it. It still looks just fine. That is a lot more than I can say for any other finish that is on the guns I use.

The technique I used was to run it on, let it set and rub off what didn't absorb. I kept doing these steps until there were no longer any "dry" spots left. It took several applications, but I don't recall how many.

Re: Finish question

#3

Re: Finish question

Larry Clinton At Frankfort (Central)., Indiana

>I had several old rifles when I was a young man - Most were in pretty poor shape when purchased. I used to scrape the old finish off with broken glass, sop on BLO and wipe in 10 minutes or so. I waited a day or so between re-coating - I put several coats on. When the finish would get scratched while hunting, it was very easy to lightly sand and re-coat. I would not put any "top coat" on the stock as one of the big advantages is the "repairablilty" of the BLO.

Re: Finish question

#4

Re: Linseed oil, boiled linseed oil, and Watco

Al Stokka - Cambridge, Iowa

>Ray,

I suspect that the advice referred to Linseed oil, rather than boiled liseed oil. While linseed oil may not dry (I don't know), boiled linseed oil certainly will.

All of the wooden-handled outdoor tools on my grandfather's farm were finished with boiled linseed oil. Those tools, most of which are now in my barn, are over 40 years old and the handles are near-new.

Watco Danish Oil also works as a finish on firearm stocks. Gives you the option of various colors, too should you desire that option. One of my shotgun is so finished, followed by a coat of Johnson paste wax every couple of years (or whenever I remember).

al

Re: Finish question

#5

Linseed Oil and Water

David Yoho

>The only reservation I'd have for finishing a gun stock with any type of linseed oil is it will not block moisture at all. I can remember any number of times, when I hunted, being caught in the rain or brushing against foliage that was wet. If it was a nice gun, I'd think about a more substantial finish than linseed oil and wax.

David

Re: Finish question

#6

contrary to my experience

Bill Tindal, E.TN

>Short of dumping the gun overboard while duck hunting, typical hunting conditions are not going to be a problem with an oil finish. I can post a picture of a 75 year old Savage 99 stock with an oil finish if there is any doubt about the veracity of my claim. Its original owner worked at Savage Arms in Utica in the 1920's and purchased the rifle while working there. This gun hunted in northern NY in rain and snow.

That said, are you going to hunt with this gun, or look at it. In my mind there is no more practical finish for a gun than one of the oil finishes. However, if I just wanted to look at it I would be more inclined to treat it as a piece of furniture and finish accordingly.

I have a lot of guns I hunt with and the ones with lacquer/varnish/shiny stuff finishes all look like crap and the ones that I have redone with oil don't.

Re: Finish question

#7

Re: I agree Bill

Larry Clinton At Frankfort (Central)., Indiana

>I hunted many years with my 22 rifles treated with BLO only. I hunted in the rain, often the gun was wet with dew from the plants etc. I never had any problems with warping, The water did run off the finish. I also found the finish to be very easy to repair. The stock often was scratched with thorns, barbed wire etc. Sometimes a light sanding or scraping was required to level the surface - a new coat of oil and the stock looked like new.