Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Exterior cabinetry

Posts

Exterior cabinetry

#1

Exterior cabinetry

Justin Szeliga

>Hi- Has anyone very used cabinets by In & Out Cabinetry? They are made to be used outdoors, & I'm wondering what it is about them that makes them stable in exterior applications. Sounds like it's PVC w/stainless hardware, but the descriptions aren't clear.

The job I have to get these for is a porch under roof, about 14' deep, very much protected from the weather. What do folks think about using MDF cabinets w/stainless hardware?

And where can I find stainless euro hinges?

Thanks

Justin

Re: Exterior cabinetry

#2

Re: Exterior cabinetry

Larry Clinton At Frankfort (Central)., Indiana

>IMHO if you think you need "stainless steel hardware" MDF would be a poor choice. MDF doesn't like water at all, I would consider it an inside material only. I'm nowhere near an expert so other's opinions may be more valuable. I personally would make them out of solid wood (frame & panel construction) or would use MDO. I am known for overkill so take my opinion for what its worth - free.

Re: Exterior cabinetry

#3

Re: Exterior cabinetry

Kirk D.

>MDF will fall apart in the rain. There are versions of MDF made to take the elements but I have limited experience with them.. MDF has some drawbacks when using screws or nails. A better choice might be MDO. MDO is exterior grade plywood with a paintable paper skin on the surface. I believe alot of highway signs are made of this. Also it has a track record of working.It is plywood so it screws and nails well. AC fir plywood varnised or primed and painted is also a good choice in my opinion.

Re: Exterior cabinetry

#4

Re: Exterior cabinetry

Bill White

>"Extira" is a brand of ex grade mdf. I will be using it on some square, tapered (think craftsman cottage style) porch columns. Look it up on Google for more details.

No affiliation.

Bill

Re: Exterior cabinetry

#5

Ellis Walentine

No MDF outdoors

Ellis Walentine

>You didn't mention the budget, Justin, but if the customer can afford it, I'd go with solid wood as Larry said. Design it for an outdoor environment (i.e., assume that the MC will level out at between 12% and 15% , unless it's in Arizona). You don't need to use a really durable wood if it doesn't get direct rain or snow, but I'd finish it with spar varnish.

I have never seen stainless Euro hinges, but the nickel plated variety made by the usual suspects (Hettich, Blum, Grass, Salice, etc.) should hold up fine.

Ellis

Re: Exterior cabinetry

#6

Ellis Walentine

Re: Exterior cabinetry

Ellis Walentine

>I have used an exterior MDF is fine if you are going to paint or varnish the piece, but all bets are off if you chip the finish. Even though it doesn't swell up like a sponge like regular MDF, the exterior fiberboard products I've tried are still affected somewhat by moisture, and if it gets in there, it tends to lift the surrounding finish. As long as the finish is intact, the material holds its shape very well.

If this is a paint-grade job, consider MDO, which is virtually immune to moisture.

Ellis Walentine

Re: Exterior cabinetry

#7

Re: Exterior cabinetry

Charles Sharp

>I have built a couple of outdoor cabinets out of T11 exterior siding. I painted one of them and used Poly on the other, both have stood up well. I made the door panels out of the same material and kept all the grooves inline.