Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Hide glue question

Posts

Hide glue question

#1

Hide glue question

Wayne Carson

>I veneered some white oak to some MDF. After hammer gluing the veneer up and it drying I noticed that not all the residue was sanded off the top. I plan to use dye stain water based to color the veneer and need to know if the dye stain will penetrate the hide glue or do I need to remove it completely. If I need to remove it any suggestions would be very much appreciated.

Re: Hide glue question

#2

Color but not penetrate

Michael Dresdner

>Water soluble dye will color hide glue but will not penetrate through to the wood. That means you will get color but it may or may not look like the raw wood adjacent. You can easily remove hide glue reside from the surface with warm water on a nylon abrasive pad, and I would do that, then sand, prior to staining with dye.

Re: Hide glue question

#3

nylon scrubber

Wayne Carson

>are you talking about like the one my wife uses to do dishes has a sponge on one side and a nylon scrubber on the other?

Re: Hide glue question

#4

Re: nylon scrubber *LINK*

GolfSteve in Calgary

>He's probably referring to something like these:

http://www.leevalley.com/wood/page.aspx?c=1&p=20063&cat=1,190,43040

Similar to the kitchen variety, except these have some abrasive bonded to the fibres.


abrasive pads

Re: Hide glue question

#5

Scotchbrite is a brand of nylon abrasive pad

Michael Dresdner

>