Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

My B-day present and Gloat

Posts

My B-day present and Gloat

#1

My B-day present and Gloat

Dustmaker Mike

>Well today is the day I changes how many years old I am. Here is the Gloat part(-; Last night I got a call from my Realitor saying I now own a House. So the house hunting is over and the hard part begins.

Here is my one of many questions for the team. The shop will be in the basement. I am going to insulate the ceiling between the shop and the rooms above it. I was thinking of useing Sheet rock on the ceiling but then thought maybe I should just use a drop ceiling incase I have to get into the duct work or plumbing or ? Any ideas?

Thanks

Re: My B-day present and Gloat

#2

Happy Birthday! To Chico, too!

Jason Roehl in Mulberry, IN

>Well, congrats and happy birthday!

I can't say I'm real fond of drop ceilings. They just seem too fragile in a number of ways to me. That said, however, I actually like them in a basement application, for the reasons you mentioned. I'm a tinkerer type, so I would always want access to the floor/joists/ductwork/etc. because I would never know when I would want to run some speaker wire, network cabling, bell wire, cable, etc. into the walls above. When possible, I like to do "neat" installations of things like that, not the typical college apartment approach of running 100' of coax from one end to the other with it stapled to the wall around doorways and such.

Re: My B-day present and Gloat

#3

Re: My B-day present and Gloat

Joe in a Cleveland suburb

>Happy Birthday Mike.

I seem to recall FWW doing an article a few years ago on this very topic.

Also, wouldn't a drop ceiling kind of be a magnet to dust? I don't know, just wondering.

Congrats on the house.

Joe

Re: My B-day present and Gloat

#4

JL

Re: My B-day present and Gloat

JL

>Congratulations on both counts.

I've got a drop ceiling in my shop. I prefer it that way. I didn't put in the ducting for the DC system yet, so I'm glad I have a drop ceiling.

I put in track lighting for certain areas (lathe, work bench). This works for me.


img

Re: My B-day present and Gloat

#5

Re: My B-day present and Gloat

Thomas Skaggs, Foothills of Mount Level

>If you think you can slip in a gloat about a new house without hearing the traditional words "you suck" forget about it...you suck! ;-) Congratulations on the new shop...oh and the house attached to it.

And happy birthday!

Tom

Re: My B-day present and Gloat

#6

Re: My B-day present and Gloat

wilbur

>Congratulations on the house!

I would leave the ceiling unfinished until you actually have your new shop up and running for a while. In my basement shop I'm leaving my ceiling unfinished because I can't spare the height, but I'm glad that they are not finished. After working in it for a few months, I'm already planning adding some additional ceiling lights and perhaps a ceiling outlet. Having a finished ceiling would make this more difficult.

The other comments about having access to pipes/wires/cables, etc., also apply.

Re: My B-day present and Gloat

#7

Re: My B-day present and Gloat

Jim Shaver - Oakville, Ontario

>Happy Birthday Mike!

Take care,

Jim

Re: My B-day present and Gloat

#8

Happy Birthday Mike!

HC Sakman

>Wow... same day!?

Chico...

Re: My B-day present and Gloat

#9

Wow are we brothers and Twins?

Dustmaker Mike

>Thanks and Happy B-day too you(-;

Re: My B-day present and Gloat

#10

Re: My B-day present and Gloat

George@Colonel's Workshop-Havertown PA

>Good Morning Mike and Have a very Happy Birthday,

I prefer the drop ceiling for reasons already memtioned in the above posts. No need to do it all now, because you will need to find optimum places for the DC plumbing, Air Cleaner, drop/task lights and retractible electric drop cords.

George

Re: My B-day present and Gloat

#11

Congrats on the new house Mike!

HC Sakman

>

Re: My B-day present and Gloat

#12

Ellis Walentine

Happy B'day, Homeowner!

Ellis Walentine

>Many happy returns.

Regarding the ceiling, you mentioned insulation. I assume you mean sound insulation. Drop ceilings don't offer much in the way of STC (sound transmission coefficient), so they aren't going to work as well as something denser. The ideal sound barrier would be some acoustic paneling (a type of fiberglass board with a higher NRC (noise reduction coefficient -- a measure of how well a medium traps sound) between the joists, and a flakeboard ceiling, preferably with the flakeboard nailed to separate joists that are not directly connected to the existing joist structure. There are books and articles galore on how to do this. The nice thing about using flakeboard panels is that you could always unscrew them if you need to access the ceiling. That would be tough with sheetrock.

It all depends on how much noise you want to intercept.

Where is the new house?

Ellis

Re: My B-day present and Gloat

#13

Don't Shoot Me it is in

Dustmaker Mike

>Kent Ohio. About 30 or so minutes from work. It is still not the Shop I had in WA but it will do just fine. Thanks for the sound deading info I was just going to use fiberglass insolation between the joist. Now I will rethink that idea and see what I can find.

Re: My B-day present and Gloat

#14

Happy Birthday Mike!

David Sophusson, Custer Wa

>Congrats on the new house! So are you home for awhile or are your bags still packed? :-(

Happy Birthday!!

Sophie

Re: My B-day present and Gloat

#15

Re: Kent

Jim DeLaney, Austintown, OH

>Hey, Neighbor!

I'm in Austintown, about 40 miles East of you.

You're closer to Hartville Hardware than I am - just a few (maybe 20?) miles down Route 43 from you. Been there yet?

If you ever get to stay home long enough, drop me a line. Maybe we can get together. Can't be this week, though. I'm in Savannah, GA right now. Coming home via Asheville, NC and Cincinnati, first of next week.

Regards,

Jim D.

Re: My B-day present and Gloat

#16

Nope bags are unpacked

Dustmaker Mike

>I have to do laundry(-; I think I will be here until the first of June then I go to NYC and over to Amsterdam and Brussels for a week or two.

Re: My B-day present and Gloat

#17

Re: My B-day present and Gloat

Bob Fawcett

>Mike,

My basement is insulated with that stuff that looks like bubble wrap made of aluminum foil. It works pretty well and makes any light you put in the shop really effective. I have used some of those K-mart torcher lites, the ones that shine on the ceiling and they light the place up really well with that ceiling. I don't recommend them though they catch all your sawdust and could start a fire.

Re: My B-day present and Gloat

#18

Happy Birthday to you both! And--

Joanne Adler in Pt. Pleasant, PA

>Mike, congrats on the new house!

Re: My B-day present and Gloat

#19

Re: My B-day present and Gloat

Jennifer@Indy.USA

>Hey Mike! Happy Birthday!!! to YOU!

Hope you had a great day and congrats on your new abode! What a great thing!

Enjoy your new digs!

Jen :)