Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

ply medalions on solid

Posts

ply medalions on solid

#1

ply medalions on solid

mike mcnerney

>I am making up some ply medalions & want to glue them on solid stock.

I have worked out the ply sandwich which will be walnut either 1/16" 3 ply as in normal ply alternating direction totaling 3/16" thickness or 3 plys of 1/40" totaling .075 or 1/16" +. The next day I will glue 1/40" on the back side and 1/40" burl on the front side, all with unibond 800.

This does result in a nice flat ply. Here's my main question. When I glue this on to 1 1/8" x 6" solid walnut should I simply glue it on the face, I'm thinking of locating it with 4 22 gauge nails & WHAT KIND OF GLUE? Or route a 1/32" deep recess. With wood movement would that work?

thanks

Mike McNerney in ottawa

Re: ply medalions on solid

#2

Re: ply medalions on solid

peter bunnett

>Sorry Mike I cant help you.Pete Bunnett in Ompah

Re: ply medalions on solid

#3

My suggestion

Derek

>I am not sure how large the piece is, but if it is large I suggest that you only glue the center of it. You could glue a narrow center strip of the plywood to the solid-wood substrate where the strip is along the line of the grain of the substrate. I would think a 1"-2" wide portion would be safe. I would not recommend gluing a wide piece of plywood to solid wood though.

That said, you need to make sure that you get good pressure on the glue joint when you clamp it. You probably will need some sort of caul. A slight recess on the back side, surrounding the glued area, would definitely help with this.

Is there any way you can make a frame-and-panel structure out of this with the plywood at the center? In that case, the plywood could be glued into a grove in the frame.

Titebond or similar woodworking glue should be sufficent for this.