'Nother Lensboard...
Scott in Douglassville
>Ok, I'm sure no one cares at this point, but here's another lensboard I just finished. It's actually a lensboard adapter, made to allow smaller lensboards (with lens attached) to be used in different cameras without having to remount the lens:

With the smaller Technica-style board installed:

This was made with a small scrap of curly cherry I'd kept for unknown reasons years ago. Cleaned up wonderfully. Board's just shy of 3/8" thick. The corners are joined with half-laps, pinned with cherry dowels:


FWIW, this is going into a Burke and James. The client is going to supply his own clamping hardware.
Well, all this camera fabbing has gotten me back into woodworking. My joinery's tighter than it ever was before, and I'm really enjoying it now. I have a Senece Competitor 5x7 on its way here right now, which will need a little woodworking to repair:

After that, I think I'm finally ready to start designing and building a 4x5 from scratch. Wife's gonna kill me... :^D
Thanks for looking.
Scott



