Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Vacuum Veneering

Posts

Vacuum Veneering

#1

Vacuum Veneering

Barry Daniel

>I saw Norm use one of those skateboard vacuum setups recently, just wanted to know how well they really work? tired of the 30 clamps and weird setups just to veneer a 12x9 board.

Barry

Re: Vacuum Veneering

#2

Re: Vacuum Veneering *LINK*

Mark Mandell - Gone Round In Jersey

>Barry,

Spend a little time going through the linked site. You'll get a pretty good idea of how it all works.

mm


JWW

Re: Vacuum Veneering

#3

Re: Vacuum Veneering

Ted Wong

>I saw one demoed on one of the woodworking shows. For the low cost involved it looks like a pretty good alternative to the larger setups that require a vacuum pump.

Re: Vacuum Veneering

#4

Re: Vacuum Veneering

Sue McLam in Orange, VT

>I used one about a month ago to glue up some backgammon veneer onto some MDF and it worked excellently. It has plenty of pressure.

Sue

Re: Vacuum Veneering

#5

Re: Vacuum Veneering

tsproul

>I've got it.

It does work. It isnt' all that convenient but if you're only going to press stuff 2-3/year, it makes sense. Want to purchase mine?

I'd get a "C" type enclosure to seal the bag rather than that butyl rubber sealing adhesive. That adhesive is the worst aspect of it, by far.

Toss the instructions and follow typical vacuum veneering methods - platens with grooves and such. I use a little 1 cfm pump nowadays.

Tim

Re: Vacuum Veneering

#6

Re: Vacuum Veneering

Barry Daniel-Camden, NC

>If you are willing to part with it let me know @ the e-mail above.

Barry