Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

OT Old GE Gas Clothes Dryer

Posts

OT Old GE Gas Clothes Dryer

#1

OT Old GE Gas Clothes Dryer

Fred West in West Chester, PA

>that now hums and will not start except occasionally and only when it does not hum. I have cleaned it thoroughly, replaced the old belt and idler and the drum is not binding. HELP!!!!!! Any thought from the vast collection of wisdom inherent on this board? :o) Shooting it is not an option and already strongly considered. :o) Thank you in advance. Fred

Re: OT Old GE Gas Clothes Dryer

#2

Re: OT Old GE Gas Clothes Dryer

Stephen in Frankfort KY

>If you hold the door switch in and give the drum a good push, will it start? If it does it is likely a bad motor.

Re: OT Old GE Gas Clothes Dryer

#3

Check the start capacitor, if the motor has one.

Gil Jones on Lake Seminole GA

>

Re: OT Old GE Gas Clothes Dryer

#4

It hums? Add lyric! *LINK*

Hoa Dinh

>Just kidding, Fred.

Follow the link below. The click on "It won't tumble." It tells you how to test the motor.

Good luck.

-- Hoa


WHAT IS WRONG WITH YOUR DRYER?

Re: OT Old GE Gas Clothes Dryer

#5

Re: It hums? Add lyric!

Fred West in West Chester, PA

>Thank you all and I am unfortunately humming the lyric, NEW STINKIN MOTOR. :o) Truly, thank you all. Fred

Re: OT Old GE Gas Clothes Dryer

#6

Fred, That Dryer's Takin' You To The Cleaners

George@Colonel's Workshop-Havertown PA

>

Re: OT Old GE Gas Clothes Dryer

#7

Start run plate bad Old GE Gas Clothes Dryer

del schisler

>their is a start run plate that probly bad Those motors if memory serves me right their is no cap. on those motors Just a start run plate