Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Setting up a shop

Posts

Setting up a shop

#1

Setting up a shop

Leewhope

>So I think I already know the answer to my question, but wanted to get some feedback from people who know A LOT more than I do. I'm in the process of setting up a very large workshop (we're contemplating having a milling component for round logs to give you an idea of size)in the Bahamas. In my travels to Latin America sourcing timber all the mills/shops are "open air" but obviously with a roof. My question as it pertains to the space where we'll be ripping, cutting, sawing, planing, etc. is "Is there a reason to have it enclosed and ventilated or is open-sided perfectly acceptable?" Open sided, since the climate allows for it, seems to make complete sense, but I'm just wondering if there is something here that I am missing.

Re: Setting up a shop

#2

Re: Setting up a shop

arw01

>air conditioning I suppose. If it was closed up, would it not be too hot to work in after a couple of days of carrabean sun?

You need to be able to protect machines from the occassionaly hurricane though.

Alan

Re: Setting up a shop

#3

Re: Setting up a shop

George@Colonel's Workshop-Havertown PA

>Good Evening Leewhope,

I like the idea of having it open if you can cope with the heat and humidity. I think scheduled regular routine daily maintenance can keep ahead of the rust accumulation on essential surfaces. An open air shop will also ventillate the dust and production debris, and reduce the amount of indoor light needed. Administrative space can be colocated and comfortable.

George

Re: Setting up a shop

#4

Re: Setting up a shop

Charles Self

>Around here, it's fairly common for sawmills to be open-sided. These are all rough mills, though, so if you're doing planing and similar work, you'd need an enclosed section: those knives rust too quickly and easily.

I can think of four sawmills within a five mile radius of my home that are open-sided, and, in truth, I don't know of one that isn't.

We have relatively mild weather here in Central Virginia, but sawyers need gloves in winter, and usually an insulated vest, needs that won't crop up in the Carribean.

Re: Setting up a shop

#5

Re: Setting up a shop

Jesse in New Mexico

>Another concern might be grit and sand. They wreak havoc on blades and knives. Good idea to give rough lumber a good once over with a stiff brush.

Re: Setting up a shop

#6

Hawaii shops

Bill Tindal, E.TN

>I was amazed to see that many shops in Hawaii were open on at least one side. There would be a large door that would close it off at night. Sure would eliminate the dust problem if there were a breeze.

Re: Setting up a shop

#7

Re: Setting up a shop

Jim Swank

>There's a lot to be said for an open shop when the weather is nice. Have you given any thought to security - theft, vandalism, etc? They may not be issues in your proposed location, but don't overlook them.

Re: Setting up a shop

#8

Ellis Walentine

Open is fine

Ellis Walentine

>Some years ago, back in the 90s sometime, I had a dream assignment. I was flown to Barbados to consult with this mega millionaire who was renovating an incredible sugar plantation. A former employee of mine who had gone on to Harvard architecture school, was one of several architects and project managers on the job. He had set up their on-site workshop with large screened windows all around and it didn't appear to have any effect at all on the caliber of the work or any moisture or dust concerns. All the sanding and assembly was done outside the main machine room on a totally open air deck that surrounded the structure. Tropical breezes worked great for clearing the air of fine dust; only the main machines had dust collection arrangements.

In the tropics, the ambient moisture content of wood is way up there, so it stands to reason that you can work in the same relative humidity conditions.

Ellis Walentine, Host

Re: Setting up a shop

#9

Re: Setting up a shop

Mike Fitterling

>You have a different kind of humidity to contend with there. I would do all I could to mitigate it--salt air. Ever notice how quickly the cars rust out there? There is not a spot in the Bahamas far enough away from the sea to get away from that. Also, in the case of a hurricane, an open-sided building invites the roof to lift off and even if that does not happen the winds will send horizontal rain into the interior of the shop. As you are planning, keep in mind the prevailing winds which are predominantly east-southeast and more east as you move down the chain of islands to the south. Of course, during the winter months you will have the weekly norther when they will back in a full circle.

I would love to see some of the wood you will be sawing. If you ever get some chunks of lignum Vitae from a fallen tree let us know!Wonder if Chalks would deliver lumber to Miami. Hmmm.

Good luck with your endeavor.

Mike

Re: Setting up a shop

#10

I guess I should clarify my post . . .

Mike Fitterling

>. . . to say that the humidity concerns I mentioned are for the machinery, not the woodworking. As Ellis mentioned, you ought to be just fine doing the woodworking outside. An enclosed area would benefit the machines as would careful regular maintenance. Handtool and non-stationary tool work could be done outside. Not having sides on part of the shop is a crap shoot when it comes to heavy weather; you'll have to access that risk yourself.

Re: Setting up a shop

#11

Re: Setting up a shop

Barry Irby

>I have been in two shops in the islands, not sawmills but woodworking shops. On was an open sided steel building and the other was a timber frame building that had shutters around the outside. They made shutters in the shop so they were showing off their wares.

The wood appeared fine, but the tools were rusting while we watched. I marveled that they could even keep it running. They did heavily oil shafts and bearings, but table were just sheets of rust. They used them anyway. I really don't know what they did about security or hurricanes. Hey, it was the islands, mon.

Re: Setting up a shop

#12

Re: Setting up a shop

Charles Self

>Security in sawmills doesn't appear to be a major problem around here, probably because most are close to roads, and, in at least two cases I know, one of the owners lives across the road from the mill.

Close the gate, turn the pit bull loose, and go home with no worries, but with a deer rifle next to a front window.

Nope. Very little problem with security.

Re: Setting up a shop

#13

I would consider getting a TiN top saw

Keith Newton

>Titanium Nitrite (TiN) coated Table. Not having to worry about rust, and having natural slipperiness without contamination of the wood is important everywhere, but even more-so down there.

The new Steel City saws have it, I don't know about other brands.

Re: Setting up a shop

#14

Re: Setting up a shop

Leewhope

>Howdy all, Thank yoy very much for your insights. You've def. given me some food for thought. Great website and I'll be back to hit you up for more advice/info. in the future. Thanks again and I really do appreciate it!

Best,

Lee