Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

WC Weekend Accomplishments.....

Posts

WC Weekend Accomplishments.....

#1

WC Weekend Accomplishments.....

Dennis E. Peacock

>30 Apr 2007

Good Morning....well...it's almost lunch time now.

I did get around to finishing up the two arched end "brick stacks" for the kitchen table project this weekend. Thanks to Mark Cothren for lending me some of his bessey clamps as more clamps made the work go much faster as I was able to glue and clamp a single row of the arch at a time instead.


I also worked on 3 bowls, a 4th one was recently done, but I needed to apply the finish. Two bowls are going to the National Kidney Foundation to help raise funds for this worthy cause.

I also went to church on Sunday...but didn't play this weekend as I wasn't scheduled.


Photo Sharing and Video Hosting at Photobucket

The last thing I did was to work with Joseph on roughing out/turning his first pecan bowl. He's been turning maple as it's soft as I knew it was time to expose him to turning something harder. He took the challenge...ya know, sure wish I had shop access to stuff like this when "I" was 12 years old. :rolleyes:

So what did YOU do this weekend?

Best of weeks to you all.

Dennis

Re: WC Weekend Accomplishments.....

#2

Not much this weekend

Dominic Greco in Richboro PA

>because of the rain. But I did start my new job last Wednesday. After being out of work for two months, it feels great to be back.

I did manage to clean up the shop a little bit. But other than that, most of the time was spent trying to keep my two year old daughter entertained!

See ya around,

Dominic

Re: WC Weekend Accomplishments.....

#3

The Shop Is Open!!

Jim Shaver - Oakville, Ontario

>I spent some time this week with the Garage/shop door open. My neighbours get excited when they see that, they say that it�s the official sign that Winter is over!

I also spent some time moving some over flow wood to a temporary out door storage spot. It�s about 300 bd ft of white oak, walnut and cherry, all stickered and covered�I need to open the ends a bit more for improved air flow.

Photo Sharing and Video Hosting at Photobucket

I set Casey out as my guard in case Tommy tries to come by and steal my treasures��..Casey has his picture memorized!!

Photo Sharing and Video Hosting at Photobucket

So the 07 Shop Season is Open, Let the Projects begin!

I need to work down this stack before the snow comes.....

Take care,

Jim

I am anxious to see your progress shots Dennis..

Re: WC Weekend Accomplishments.....

#4

Day of Service *LINK*

Tom Dunlap in Atlanta

>On Saturday about 30-35 arborists from the Georgia Arborist Assoctiation gathered at the Andersonville Prison National Historic Site to celebrate Arbor Day by pruning many of the trees in the cemetary. We figured that by the end of the day we

'gave' between $80- $100,000 worth of work to the site. There are a few trees that were on the site at the time of the Civil War that were pruned to make them healthier and safer for the next generations.

While this wasn't woodworking like we think of it here it was woodworking in the most global sense of the term :)

Tom


ANHS

Re: WC Weekend Accomplishments.....

#5

JL

Re: WC Weekend Accomplishments.....

JL

>Planted some rose bushes, some herbs and some tomato plants. Worked on my cabinet carcasses also.

Re: WC Weekend Accomplishments.....

#6

JL

Re: Save any branches??

JL

>

Re: WC Weekend Accomplishments.....

#7

Re: WC Weekend Accomplishments.....

Joe in a Cleveland suburb

>I was able to work on this little table some. Not a lot, but at least a little.

http://joeott.blogspot.com/

Joe

Re: WC Weekend Accomplishments.....

#8

More yard work here

wilbur

>50 bags of mulch, one station wagon, two trips.

Re: WC Weekend Accomplishments.....

#9

Made Poor Man's D-Handle Router Base

George@Colonel's Workshop-Havertown PA

>Good Afternoon Dennis,

Thanks to Hoa Dinh, a supply of plastic arrived on Saturday via USPS, and I gave the current master bedroom project a day of rest. Had a nice sub base and handle fabricated in a couple hours and used some shellac on the cherry D handle Grip. Looks great. Than I milled up almost the last of my cherry stock to be used in the chest-on-chest. Today I met my #1 son and we went to buy a mint condition Jet 14" bandsaw with riser block, Jet fence, and wheeled dolly. It came with a couple 93 1/2" bands. My old Jet blue saw, which is very nearly pristine after 10 years, will go to #3 son after I get the new one set up and swap fences. I will have just enough overhead room to accommodate the riser block and dolly. I need to configurate it with a 4" DC port in the lower door.

George

Re: WC Weekend Accomplishments.....

#10

Doll Cradle

Tom Pilsbury (Chicago)

>Finally completed this pendulum doll cradle for my 2 year old granddaughter. A good project for me. It gave me a chance to use the table saw, jointer, bandsaw, router, biscuit joiner, and drill press. Made half lap joints, roundovers, dados and plugs. Materials are pine and plywood finished with cherry stain and 3 coats of water based polyurethane.

Plans from Wood Magazine issue #145 Nov.2002

As always, beer is for perspective (and inspiration), not for Alice.


img

Re: WC Weekend Accomplishments.....

#11

Re: WC Weekend Accomplishments.....

David Hay @ Denver

>I got some shop time in on Saturday. Spent some time milling additional stock for a lamp I'm making. Somehow didn't mill enough the first time around.

I also spent some time building a quick and dirty, sled style, tapering jig (opposed to the hinge style seen on the NYW). to hold the small pieces for tapering.

The rest of the weekend was mainly spent outside either enjoying the weather or doing yard work.

David

Re: WC Weekend Accomplishments.....

#12

Play It Again, Sam!

George@Colonel's Workshop-Havertown PA

>

Re: WC Weekend Accomplishments.....

#13

nuttin. Tax time up here..

Mike King, Sherwood Park, AB

>ugh.

No wait- I get a refund! Exactly enuff to run out and scoop a tilt-head mortiser. And a solar panel fer the RV! And a charge controller! And a deep-cycle battery! Wow!

You'll have to 'scuse me. I'm getting REALLY Determined to get off the grid.. (How much 12v juice do I need to run my 3 hp Cabinet saw anyway?? ;-)

Re: WC Weekend Accomplishments.....

#14

Unfortunately my weekend was tearing

Fred West in West Chester, PA

>apart my 20+ year old GE clothes dryer and replaced the idler and the belt. Luckily I found out about Tribles in Downingtown, PA and they carry all kinds of obscure parts. Cleaned the dryer, the entire vent system, replaced those two parts and it worked like a dream for five minutes. :o( Fred

Re: WC Weekend Accomplishments.....

#15

Re: WC Weekend Accomplishments.....

Barry Irby

>Completed the table I've been working on for my cousin's daughter.

Re: WC Weekend Accomplishments.....

#16

Woodworkers Get-Together in Gainesville

Mike Fitterling

>Got to meet a lot of fellow woodworkers at a get-together near Gainesville (McIntosh) this weekend. Lots of guys and gals (one came from California) from Woodnet and a bunch from a pen turning club. Nice spot at Gary's in the woods. So nice I set up the tent at the back of the Element and stayed the night. In the morning I was greeted by the sound of two gobblers out in an adjacent field and one walked right past the "camper."