Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

New Tablesaw Fence

Posts

New Tablesaw Fence

#1

New Tablesaw Fence

Patrick Schupbach

>I am considering upgrading my Jet contractors saw. Looking at Shop Fox [Gizzly] & Vega. 52" inch rip. Anybody with feedback would be great. Also thinking about Woodhavens extension table w/ router mount. It sounds like a good set up. Thanks!!

Re: New Tablesaw Fence

#2

Re: New Tablesaw Fence

Scott in Montana

>I had a Vega fence on a Powermatic contractors saw for several years and liked it very much. Even with moving it from job site to job site, it stayed true. I have no experience with the other fence.

I have had an Incra Jig fence on my Powermatic 66 in the shop for over five years and I love it. I think they are currently in the $400 price range. I'm not sure what the current pricing is on the Vega fence.

Happy shopping!

Scott

Re: New Tablesaw Fence

#3

Which Shop Fox?? *LINK*

Jim Rahbe, Bedford, TX

>Patrick,

Grizzly / Shop Fox makes two styles of fences.. The Original and the Classic. The Original uses bearings, both at the front and the rear of the fence, which hold the fence in place. This makes it impossible to lift the fence off the saw. It also makes it impossible to mount an out-feed table directly to the back of the saw, because the rear hold down needs about 6 inches of clearance. Their Classic style fence, is a Biesemeyer clone� Nothing wrong with either one, as long as you get the one that suits your needs.

Jim R.


The "Original" Shop Fox

Re: New Tablesaw Fence

#4

Re: Which Shop Fox??

Patrick Schupbach

>Sorry I was not clear. I am considering the classic Shop Fox. It does appear to be a Biesmeyer clone. Thanks for the response.

Re: New Tablesaw Fence

#5

Re: New Tablesaw Fence

Dave in Haverford. PA

>I have the same saw and a Vega fence. It is far superior to the Xacta fence that came with the saw. Alignment with the miter groove is more accurate and because it has four screws to secure it, it never moves. Fence also has a micro-adjust feature - excellent!