Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Tablesaw lubrication

Posts

Tablesaw lubrication

#1

Tablesaw lubrication

Scott in Montana

>First, I'd like to apologize as I know this subject has been covered scores of times. I unsuccessfully tried an article and message search. Probably my fault.

Anyhow, it's time to clean up my Powermatic 66 table saw and I'm wondering what people are using to lubricate the mechanism. Is white lithium grease still the overall best? Looking on my shelves I also have Slip-It (spray and tub), graphite spray, and maybe a few more.

Also, has anyone out there used Fenner's power twist or link belts on a PM66? The pulley throats look quite narrow. Any suggestions for other quality belts?

Any input on other things to look at while I have the top off would certainly be welcomed.

Thank you for your help.

Scott

Re: Tablesaw lubrication

#2

Re: Tablesaw lubrication

Mark Mandell - Gone Round In Jersey

>Scott,

I use dry lub on my JET cabinet saw's elevators and pinions. That way I don't have to remove all of it when it gets covered with dust in use.

I also use Fenner drives on the JET. They do come in different widths, so check your supplier for the one that will fit your saw's reeves.

mm

Re: Tablesaw lubrication

#3

Delta recommnedation

Bill Tindal, E.TN

>I took a maintenance class from Delta many years ago and the instructor used Johnsons past wax for the gears and sliding parts. Note, now days all belts are matched so there is no need to order "matched belts" for the saw. Just go to any store that sells belts and get how ever many you need.