Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

LV Windsor Stool Class, Long/pics

Posts

LV Windsor Stool Class, Long/pics

#1

LV Windsor Stool Class, Long/pics

Jim Shaver - Oakville, Ontario

>Today I took a class with John Robinson on making a Windsor stool, it was held at the Burlington Lee Valley store.

The class was actually a Friday night- all day Saturday class, we were 5 in the class. For those of you who do not know of John, he�s one of the best Windsor chair makers/teachers in Canada (he does teach in the US as well). John is an excellent teacher, always patient, full of funny stories and never allows any student to get frustrated.

Making the stool is also a good first step on the path to making a Windsor chair, many similar processes and tool work. John led us through the project, step by step, leading through demonstration and carefully explaining details as needed.

Photo Sharing and Video Hosting at Photobucket

We started out first by laying out our seat base, marking and locating where the three leg holes need to be positioned. We drilled through the top and then reamed through the base.

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

To enable some time John pre turned the legs and spindles for the class, he did say that if we had to turn them our selves that it might take an hour or so to do that.

Once we had the leg holes drilled and reamed we used the legs to capture the rake and splay angles, trying to make a symmetrical structure by measuring with a set of winding sticks and a home made measuring gauge.

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Once the legs had been used to accurately size the undercarriage the top was then cut out to rough shape on the bandsaw, we were using bass wood for the seat and cherry for the legs and stretchers.

Photo Sharing and Video Hosting at Photobucket

Now it was time to shape the seat, a lot of work using all hand tools, draw knives, adz, scorps, spoke shaves, compass plane, scorps and travishers. This process reminded me a great deal of the method that Chris Schwarz teaches Course-Medium-Fine. Working with tools that produce Course results through to tools that produce Fine surfaces, no sanding.

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Once the seat was completed it was time to focus on completing the undercarriage. As for the drilling the seat we again used a brace and spoonbits.

Photo Sharing and Video Hosting at Photobucket

We then used a tenon cutter for sizing the stretchers.

Photo Sharing and Video Hosting at Photobucket

The base was then glued up and attached to the seat base.

The tenons were then wedged into the seat.

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

And here is the class picture, it was a pleasure to meet everyone.

Photo Sharing and Video Hosting at Photobucket

I can see myself using milk paint for a final finish on my stool, John mentioned a few colour combinations that work well and give an authentic appearance.

Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Again if you have an interest in making Windsor chairs and ever have a chance to take a class with John I highly recommend it!

Many Thanks to the Burlington LV staff, especially Sylvester.

Take care,

Jim

Re: LV Windsor Stool Class, Long/pics

#2

Excellent post, Jim.

Martin from Granbury

>

Re: LV Windsor Stool Class, Long/pics

#3

You have too much fun.

Jennifer@Indy.USA

>Jim, you have way too much woodworking fun! I think we all live vicariously through you and your wood related adventures. I wish I could take as many classes as you do. This looks like a fun class. I bet it was relaxing in that you were only using hand tools. No noise from the electrics....ahhhh.

Please post some pictures after you put finish on yours. I'd like to see how it turns out with the milk paint finish.

As always...thanks for taking us along in your back pocket!

Jen :)

Re: LV Windsor Stool Class, Long/pics

#4

Reamer?

Ron Bauman

>The 4th picture down shows a brace with a (?) in it. Is that an adjustable reamer? or what? I've been looking for one to taper 1 1/4" holes for my stools. Most tapered reamers don't get that large for wood.

TIA

Re: LV Windsor Stool Class, Long/pics

#5

Spoombit, Reamer Link *LINK*

Jim Shaver - Oakville, Ontario

>Hi Ron,

That is a spoonbit. We used the LV reamer for our seats.


LV Reamer

Re: LV Windsor Stool Class, Long/pics

#6

Thanks All

Jim Shaver - Oakville, Ontario

>Thanks for your kind words and thoughts..

Take care,

Jim

Re: LV Windsor Stool Class, Long/pics

#7

Ellis Walentine

What fun, Jim

Ellis Walentine

>Was that a little Leon Robbins plane in that one picture?

Oh, and, you mentioned gluing up the base and then attaching it to the seat. Were there any tricks to getting all those opposing angles together at one time? What glue did you use?

Excellent post, Jim. Thank you.

Ellis

Re: LV Windsor Stool Class, Long/pics

#8

Nice looking stool sample Jim

Thomas Skaggs, Foothills of Mount Level

>Jim,

You have a knack for finding great workshops. Looks like you learned a lot. Your finished project looks terrific!

Tom

Re: LV Windsor Stool Class, Long/pics

#9

Thanks Ellis

Jim Shaver - Oakville, Ontario

>Hi Ellis,

Indeed you are correct about the compass plane. I am told they are now sold by Crown Planes.

The glue? In a LV store , well it's the LV GF glue of course.

The undercarridge was simple to glue up, first you attach the two stretchers together, then start with the right leg, then the left then the rear leg. The stretchers are sized 1/4" long so the undercarridge is under tension. Saying that it is also flexable and it is easy to open it a bit to fit into the tapered and reamed holes in the stool seat.

Take care,

Jim

Re: LV Windsor Stool Class, Long/pics

#10

Thanks Tommy

Jim Shaver - Oakville, Ontario

>Hi,

Yes I am fortunate to live with an hours driving distance of 4 LV stores (5 if you expand the range to 1 1/2 hours) all with great seminar programs.

The great thing about these seminars is that they are taught by local crafstmen and women and the take away for the student is either a skill or a combination including a finished project.

As you may know All of the class fee's are donated to the United Way by LV, they even give you a lunch!

Hard to beat the LV seminar programs, you never know what you might learn in a class!

:-)

Take care,

Jim

Re: LV Windsor Stool Class, Long/pics

#11

Somehow...

Dan Donaldson

>When I see the phrase "stool sample" , the picture that comes to mind doesn't look at all like this one ;-)

Re: LV Windsor Stool Class, Long/pics

#12

Re: Somehow...

Jim Shaver - Oakville, Ontario

>I know Dan,

Sometimes Tommy has a hard time keeping it clean...

:-)

Take care,

Jim

Re: LV Windsor Stool Class, Long/pics

#13

Re: LV Windsor Stool Class, Long/pics

wilbur

>I see little holes in the template for marking the locations for the legs, but how did you figure the angles for the holes for the legs of the stool? And how did you drill them?

Re: LV Windsor Stool Class, Long/pics

#14

Re: LV Windsor Stool Class, Long/pics

Jim Shaver - Oakville, Ontario

>Hi Wilbur,

The teacher knows them by heart....front legs are at 15 degrees, back leg at 17 degrees. The front legs are set at a compound angle, the second angle for the front legs follow a line intersecting the seat centre line 7 inches back from the front edge of the chair seat. The rear leg is not drilled at a compound angle, it follows the centre line of the seat.

The seat template we used is one John uses for making a child's Windsor Chair.

We used a brace and spoonbits to drill the holes.

Take care,

Jim