Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Festool DOMINO few A week of use & study *LINK*

Posts

Festool DOMINO few A week of use & study *LINK*

#1

Festool DOMINO few A week of use & study *LINK*

charlie belden

>After getting over the Sticker Shock, and having waited 'til late on the last day of the woodworking show, I made the plunge and got one of the Festool DOMINO mortising "systems" - the "base unit" plus the "accessories" plus the "Bits and Tenons" package.

I've put up some web pages on it and what I've "discovered" from both playing with the tool and studying it and the very meeger (sp?) "manual" all five pages of it, with three pages being WARNINGS and stuff like How To Plug It In.

Now if you've seen the ads for this thing you've probably written it off as just modified - and very expensive - biscuit joiner. That's very understandable - it looks like a biscuit joiner, on STEROIDS. BUT - this Ain't No Biscuit Joiner!

In addition to the obvious difference - no circular blade but a spiral bit instead, and that it cuts mortises with half round ends rahter than an arced saw kerf - it's the "presets" that really take it up quite a few notches above anything that's out there for doing furniture sized mortises.

Trying to describe this thing and some of its uses just can't be adequately done with just text, even with an attached image or two. You need to see the pictures WITH the text to show just some of what the DOMINO brings to the table. For that reason I've put up maybe six web pages about it with a fair amount of details. No pop ups, no cookies, no java scripts etc. - just text, photos and some diagrams.

If you're considering buyibng a DOMINO the info may be of use in your purchasing decision - it is, after all, a chunk of change.

If you've written off the DOMINO as "just a variation no a biscuit joiner" - have a look and you may change your mind.

Other than buying one - at the "introductory price", and playing with it for perhaps 10 hours, I have no connection with Festool or anyone who sells them - other than as a normal customer.

If you have questions, comments, suggestions or constructive criticism about anything on the web pages please feel free to ask either here or e-mail me. The illustrations I've done make sense to me but might not make sense to someone else. My goal is to provide clear, understandable information about the DOMINO - for FREE.

charlie b


Festool's DOMINO - index of web pages

Re: Festool DOMINO few A week of use & study *LINK*

#2

Re: Festool DOMINO few A week of use & study

Fred West in West Chester, PA

>Charlie, thank you for the excellent write up on the DOMINO. I too am a proud owner of one and cannot say enough about the tool, the company and Bob Marino. I too have no affiliation just extremely satisified. :o) Fred

Re: Festool DOMINO few A week of use & study *LINK*

#3

Re: Festool DOMINO few A week of use & study *LINK*

charlie belden

>So Fred - what gems have you found so far? Come up with any tricks for using the DOMINO? Anything major I missed on the pages I've done so far? Was what I've put up understandable and, if not, any suggestions for improvement?

Did the legs to apron and legs to stretcher for two bonsai tables like the ones on the link below 8 mortises per face x 4 faces = 32 mortises to cut - for each table. Put the accessory "outrigger stop pins" on the DOMINO, set both sides to about 150mm from centerline and did ALL the mortises in in maybe 20 minutes, and that's with two different offsets to the mortises long axis centerline AND putting on the small

parts end grain "thing" for the narrow stretchers. No "two front right legs", no "referenced off the wrong face" mortises. Took longer than 20 minutes just to bandsaw the rough cut the "clouds" shape on the bottom of the apron parts and guide bearing route them to a templates I'd made earlier.

The Left/Right symetry of the stop pins makes life so much easier - no parts flipping, no set ups for each end of a part - slick, simple and FAST (also accurate, something often sacrificed to speed).

Will try the DOMINO on the mitered corners of the "lift" between the top of the apron and the bottom of the table top. Aligning all four corners of a mitered frame is kind of a PITA when it comes to glue up time. Accurately loose tenon M&T joining them should make that job SO much EASIER - and stonger.

Still want to try a triple mortised corner with mortise and tenon - the semi Holy Grail of furniture joinery.

charlie b


loose tenon M&T joined tables

Re: Festool DOMINO few A week of use & study *LINK*

#4

Re: Festool DOMINO few A week of use & study

Fred West in West Chester, PA

>Charlie, so far I have not noticed anything that you missed. However, your link only works if you click on properties and copy and paste after the forward slashes as you accidentally put in four forward slashes. :o) Sorry, I meant to mention this last night. I am starting a write up of my own as well though it will propbably not be as comprehensive as yours which I have printed out and saved into my favorites. :o) Fred

Re: Festool DOMINO few A week of use & study *LINK*

#5

Ellis Walentine

Fixed your link

Ellis Walentine

>Thanks for the post, Charlie. I was really impressed with this tool too, when I saw it at the TSI show in New Jersey recently. I've always been a fan of loose tenon joinery, and this is a mighty slick way to rout mortises. I used to have two stationary slot mortisers and they were great for bigger jobs, but the Domino makes quicker work of smaller jobs like face frames and cabinet doors. I may have to save up for one of these machines.

Ellis Walentine, Host

Re: Festool DOMINO few A week of use & study *LINK*

#6

Re: Festool DOMINO few A week of use & study *LINK*

Jerry White

>Charlie,

Thank you for the excellent article. I have been busy since receiving my Domino and have yet to explore the full learning curve. Your article will be a big help.

Just in case you have not discovered it, there is a discussion over on the Festool Owner's Group regarding instructional material for the Domino. Also, Rick Christopherson has a preliminary manual available on the Festool site. http://festool.home.att.net/


Link to FOG

Re: Festool DOMINO few A week of use & study *LINK*

#7

Here's the Not-so-meager Manual *LINK*

Rick Christopherson

>Your assessment of the original owner�s manual is spot-on. However, the new manual is about 27 pages and actually shows you how to use the tool beyond just turning it on.

Because this is an unreleased manual, please observe the restrictions I have put on its distribution.


Unreleased Domino Owner's Manual

Re: Festool DOMINO few A week of use & study *LINK*

#8

Oops, No Insult Intended

Rick Christopherson

>I�m sorry Charlie. I hadn�t read your website before posting a link to the Festool Supplemental Owner�s Manual. I had assumed that your website was the typical discussion about how you found uses for the tool. I didn�t realize that your website was intended to be instructional in nature. In hindsight, I realize that posting a link to the Festool manual in a thread that you started could be considered an insult. I hope you didn�t take it as an insult, but if you did, then I apologize.

Re: Festool DOMINO few A week of use & study *LINK*

#9

Re: Oops, No Insult Intended

charlie belden

>I'm a semi-veteran of rec.woodworking so I don't take offense easily. Thanks for the courtesy but it wasn't necessary.

And thanks for the link to the Draft Manual. Having a problem downloading it from Netscape 3.0 (does that make me a computer neander). Will try it in Internet Explorer 5.0 in a while. Am anxious to see what you've put together and lookin foreward to studying it.

What I put up on my WWing site is more of a stream of consciousness than a manual. I put it up and when I've got enough pieces I reorganize it a bit so the flow of things is a bit more coherent and hopefully more useful - to me and anyone else who might get something out of it. Have a LONG way to go on this stuff.

Anyway - thanks for YOUR work. I'm sure, with your experience and apps for putting together a real manual, the Draft Manual will provide plenty of useful info.

When Hewlett Packard, back when both founders were still at the company, came out with the programmable pocket sized "calculator" they described it as A Solution Looking For Problems To Solve. That sure is applicable to the DOMINO.

charlie b

Re: Festool DOMINO few A week of use & study *LINK*

#10

Re: Oops, No Insult Intended

Rick Christopherson

>If you are having a problem downloading the manual, right-click on it and save it to your hard drive instead of letting netscape open it. Then you can open it with acrobat.