Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Need Supplier for Plastic Strips for Glass Doors

Posts

Need Supplier for Plastic Strips for Glass Doors

#1

Need Supplier for Plastic Strips for Glass Doors

Howard G

>Can you tell me where I can get this - it secures the glass in a rabbet in a cabinet door. I have seen this in Ethan Allen stuff, looks like it slips into a slot cut into the fram just above the glass. I am going to make a bunch of doors and this looks like a good way to hlod the glass, and yet also be removable. Thanks for the help.

Re: Need Supplier for Plastic Strips for Glass Doors

#2

Re: Need Supplier for Plastic Strips for Glass Doo

Ron Hildreth, Alta, Iowa

>Howard,

Have you tried any of the big box stores - Menards in my area here in NW Iowa carries that kind of stuff, or usually can order it.

Ron in Iowa

Re: Need Supplier for Plastic Strips for Glass Doors

#3

Re: Need Supplier for Plastic Strips for Glass Doo *LINK*

Andy Lincoln,In Dearborn MI

>Howard,

here's a link to Woodworkers Supply,I think this is the item you are looking for.

http://woodworker.com/cgi-bin/FULLPRES.exe?PARTNUM=937-348&LARGEVIEW=ON


Glass Retainer

Re: Need Supplier for Plastic Strips for Glass Doors

#4

Re: Need Supplier for Plastic Strips for Glass Doo *LINK*

Andy Lincoln,In Dearborn MI

>Howard,

here's a link to Woodworkers Supply,I think this is the item you are looking for.

http://woodworker.com/cgi-bin/FULLPRES.exe?PARTNUM=937-348&LARGEVIEW=ON

it is also available at Rockler : http://www.rockler.com/product.cfm?page=2277&filter=glass%20retainer


Glass Retainer

Re: Need Supplier for Plastic Strips for Glass Doors

#5

Re: Need Supplier for Plastic Strips for Glass Doo

Howard G

>Thanks I just ordered 20' from WW supply.

Re: Need Supplier for Plastic Strips for Glass Doors

#6

Re: Need Supplier for Plastic Strips for Glass Doo

Charles M

>Howard,

The glass bead comes in different barb thicknesses so you need to be sure you cut the appropriate groove width for the bead. Freud just came out with the 99-286 bit set pictured below (and GM005 Bead Strip) for making the doors with the groove and it has a small tenon for strength.

Charles M

Freud America, Inc.


img