Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

conference table touch up

Posts

conference table touch up

#1

conference table touch up

Jim in Fenton, MI

>We have a rather larger maple table in a conference room here at work. It�s natural color with wide maple edges. My assumption is that the top is veneer with a lacquer finish.

Yesterday, someone put a hot pizza on the table and it�s raised the grain in a spot less than 12� with no fogging of the finish or any discoloration. The issue is simply the rough texture.

I�ve been asked if I could take care of it and it looks pretty straight forward. My plan is to smooth the area with 320 or 400 wet-dry, brush it off well and do a coat with spray lacquer from a can.

Does anyone see any issues with this approach? Not sure if I�ll need to do more than one coat of lacquer or how the surface will feel after it dries.

Any tips would be appreciated. Thanks�

Re: conference table touch up

#2

Re: conference table touch up

Stephen in Utah

>A friend had the same problem, well ok it was the identical problem, hot pizza raised the grain on a conference table. He was going to do the same thing you did and asked me what I thought.

I told him to make a correct size disk of non-compressible material (he used mdf) and press the spot down. It worked but he did have a 12 ton press to do the job. It just pushed everything back down to the original surface, the finish in tact.

Good luck!

Stephen