Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Cruel Chair question. ( Somewhat OT)

Posts

Cruel Chair question. ( Somewhat OT)

#1

Cruel Chair question. ( Somewhat OT)

Barry Irby

>I am making a table for my cousin's daughter. It's a scaled up "copy" of an antique. They are going to buy bargain mismatched antique chairs to go with it. My cousin's EX lives with their daughter and new husband. My twisted brain has hit upon the idea of building some sort of strange and cruel chair for him to sit in. Perhaps with legs of several lengths and one of them broken. Maybe a few dozen nails driven up through the seat. It's supposed to be a joke. Got any ideas? Is this even funny or have I lost it again?

Re: Cruel Chair question. ( Somewhat OT)

#2

Re: Cruel Chair question. ( Somewhat OT)

nailshooter

>I dunno... I would be careful. I would be thinking that when I came to visit that might be my chair to sit in from now on!

Robert

Re: Cruel Chair question. ( Somewhat OT)

#3

Let him sit in the.....

Mark Goodall - ATL - tooljunkie

>....bargain mismatched antique chairs..... presumably from Walmart.

The legs will fall off themselves when he sits on it.

All the humor, none of the blame.

Happy Woodworking!

Re: Cruel Chair question. ( Somewhat OT)

#4

Old Rickover trick

Lee Schierer, McKean, PA

>Adm Rickover was reputed as wanting to make prospective submarine officers as uncomfortable as possible during the interview process. He had the guest chairs in his office made so the front legs were an inch or so shorter than the back legs so you couldn't relax without sliding out of the chair.

Lee

Re: Cruel Chair question. ( Somewhat OT)

#5

Re: Cruel Chair question. ( Somewhat OT)

George@Colonel's Workshop-Havertown PA

>Hello Barry,

I can't say if you "lost it". But I do say if you put your hand to something it should emerge nearly as good as you could possibly make it. The chair is your statement, and one you will always be identified with.

George

Re: Cruel Chair question. ( Somewhat OT)

#6

Re: Cruel Chair question. ( Somewhat OT)

Paul Leuba

>Perhaps the best message for the "Ex" is to include only two chairs with the table.

Re: Cruel Chair question. ( Somewhat OT)

#7

Re: Cruel Chair question. ( Somewhat OT)

wayne

>ya know something happened to me the other day. You know those glue traps the use for rats. Well I stepped on one and I had a heck of time getting the darn thing off my foot. You could just scrape some of the stuff off the trap and put it on the seat (it is clear) and watch what happens. It doesn't seem to dry out and he would probably tare his pants off trying to get loose. Man there are allot of weird minds on this site.

Re: Cruel Chair question. ( Somewhat OT)

#8

Re: Cruel Chair question. ( Somewhat OT)

Pete LaBelle

>You could be crafty and work on a pivot mechanism that would allow the legs to spread some when weight is applied.

Re: Cruel Chair question. ( Somewhat OT)

#9

Re: Cruel Chair question. ( Somewhat OT)

Todd O. Cronkhite Maine Native, Presently Away

>how about putting on a finish that never quite seems to dry and is always a wee bit tacky?

Or, say if you where to use uphosltery tacks put a nice pad on the bottom, and in the center of the ticking put a small round object such as a marble that will be annoying to sit on, but not so annoying as to remove the nicely tacked down leather seat.

When we had new carpet layed in our bedroom I do believe that the installers left something under it in on spot, and of coarse that spot is in my line of travel and I can tell you with assurance that that hard spot is annoying. I've threatend to cut a slit in that spot and take out whatever is under there, but after 4 years I still haven't done it.

T.O.

Re: Cruel Chair question. ( Somewhat OT)

#10

Re: Cruel Chair question. ( Somewhat OT)

DB

>Perhaps a 3" wide leather strap attached to each arm, and some more leather straps attached to the front legs. A metal halo suspended above the head. Last but not least a heavy gauge electrical cord attached to the chair. Yes I am describing an electric chair.