Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

New cabinet saw - Griz or Jet?

Posts

New cabinet saw - Griz or Jet?

#1

New cabinet saw - Griz or Jet?

Denny

>I'm getting ready to upgrade from a Delta contractor saw, and I'm looking at left-tilt 3HP saws. I'm considering either a Grizzly for about $1085 or a Jet Xacta for about $1318 delivered. I'm planning on using my Vega Pro 40" fence on either one. I'm leaning toward the Jet, the reviews seem a little more consistent, and it isn't a lot more money than the Griz. The only problem is I haven't had an opportunity to see either saw in person. I'm wondering if anyone who has actually seen these saws can comment on the choice.

Thanks,

Denny

Re: New cabinet saw - Griz or Jet?

#2

Bart Goldberg

Re: New cabinet saw - Griz or Jet?

Bart Goldberg

>I used to own the Grizzly, sold it and bought the jet. IMHO, the jet is a much better saw.

Bart

Re: New cabinet saw - Griz or Jet?

#3

Re: New cabinet saw - Griz or Jet?

Paul Dwight

>I own a Griz 1023S right-tilt cabinet saw and am very happy with it. It is smooth, powerful and accurate in my hobbyist shop. My only criticism of the saw is that the dust collection port is poorly located and undersized. I added a 6" port on the rear of the cabinet, in line with where the blade flings saw dust, and my 2HP cyclone now keeps the cabinet essentially clear of dust and chips. I'm sure this will be my last saw (unless I win the lottery and buy a big Euro-style slider).

I have casually looked at Jet cabinet saws in tool stores and haven't noticed any areas where the Jet is obviously better than the Griz. I've never used a Jet cabinet saw, though, and would not be surprised if there are differences I didn't catch in my casual inspections.

I doubt you would be disappointed with either choice. Enjoy your new saw! -- Paul

Re: New cabinet saw - Griz or Jet?

#4

Re: New cabinet saw - Griz or Jet?

Dave Anderson (Pac NW)

>I have had the Grizzly 1023 left tilt for 3 years now, and have had 0 problems. I set up the saw with a dial indicator when I got it and did not have to change anything, it was dead on every measurement. I have not had to re-set anything. I did keep my Vega 50 inch fence. Save the difference in price and buy a top line aftermarket miter gauge.

For what my 2 cents is worth,

Dave Anderson (Pac NW)

Re: New cabinet saw - Griz or Jet?

#5

No Real Difference... *LINK*

Jim Rahbe, Bedford, TX

>Denny,

My opinion is that all of the 10� cabinet saws, that most of us can afford, are all about the same. The real noticeable difference is in the fence. Since you are planning on using your old fence that makes the differences even smaller.

I currently own the 10� Jet Cabinet Saw and have been extremely happy with it. When I first got it, I did a review on the Old Badger Bond. Long and boring, now that I re-read it, but it will give you a taste of my first impressions. I can�t say anything has happened to change my mind. You can find the review in the red bar on the left under BP Reviews or at the following Link..

Jim R.


Jet Cabinet Saw Review

Re: New cabinet saw - Griz or Jet?

#6

Re: New cabinet saw - Griz or Jet?

Carol - Strawberry, AZ

>I have the Griz 1023 with the sliding table attachment. Bies fence. Wonderful set-up.

Re: New cabinet saw - Griz or Jet?

#7

Why do you think the Jet is better?

Denny

>

Re: New cabinet saw - Griz or Jet?

#8

Re: New cabinet saw - Griz or Jet?

JackLane

>Denny

Have you considered digging a little deeper and buying a SawStop? If you've never seen one in the flesh, it's one fine piece of equipment. On par with PM, Unisaws, etc. The fence is similar to the Biesemeyer.

I'm struggling with this decision right now myself. I need a second saw in my shop and am having a tough time opting for another Unisaw when this technology is out there. Of course, the price is the obstacle. For me, there will be a return over time on the Workman's Comp for my shop. That nagging voice in the back of my head keeps reminding me there's no comeback from an amputation. So far, thank God, neither I nor any of my guys have gotten hurt.

All the best

Jack

Re: New cabinet saw - Griz or Jet?

#9

Re: New cabinet saw - Griz or Jet?

Jim

>Denny,

When I was looking to purchase a cabinet saw about 5 years ago I did my homework, I even went to local dealers some of them were good enough to let me so called test drive them. After a few months of asking questions and checking out Jet,Delta,Craftsman,Oliver,Powermatic as well as a few others I finally decided on the Grizzly. Since my shop runs on a fairly tight budget I got two tools for the price that I would have paid for just a tablesaw. When I bought my saw I also bought a "6 jointer from Grizzly and I must say both tools have never given me a lick of trouble. I use my tools everyday and have put many thousands board feet through both of them, they are just as accurate today as they were the day that I set them both up.

Good luck on your decision

Sincerely,

Jim at

Clark Customs

Re: New cabinet saw - Griz or Jet?

#10

Re: New cabinet saw - Griz or Jet?

Larry Clinton At Frankfort (Central)., Indiana

>Hi Denny, I haven't purchased or used any of the Jet equipment, but it looked good at the tool shows. However I do have experience with Grizzly. I did own a 6" Griz Jointer, and replaced it with an 8" with the segmented carbide cutter head. The 6" jointer was a great tool & I sold it to a friend when I upgraded. I also purchased a 3 hp Griz cyclone. Did have some motor problems (start switch and Capacitor) - Grizzly service did a good job taking care of the issue. I have a Unisaw (US made) so don't know about the Griz saws. I would not worry about buying a Grizzly as I believe they really are a good value for the buck. Their service is above average, and their quality control is at least on a par with all the other Asian / Chinese tools. - If you want to look at one they do have a customer referral service, I am sure someone near you has one and would be more than happy to show off their tools. From what I have seen the Jet appears to be a little too proud of their name - prices are above many other tools of equal quality. That is just my opinion, I know there are many satisfied users. I am sure many feel the same way about my Unisaw and MiniMax band saw. (and they may be right). As a side note, I went to the Wood working show at Indianapolis this winter, Delta tool quality really disappointed me. I think most of there tools are made in Asia now. I think I would prefer Grizzly or Jet to the tools I saw offered at the show. Not only were the prices of the Delta much higher, IMHO, the design and quality were below the Jet and Grizzly machines.

Re: New cabinet saw - Griz or Jet?

#11

Re: New cabinet saw - Griz or Jet?

DanA

>You may want to read the negative comments on the Saw Stop on the woodweb.com site.

Re: New cabinet saw - Griz or Jet?

#12

Thanks for all the input

Denny

>It looks like both choices were OK, at this point I may decide by which can ship faster.

Thanks again,

Denny

By the way, the Sawstop option that was mentioned would take more than digging a little deeper, that would be a major excavation...

Re: New cabinet saw - Griz or Jet?

#13

Re: I've read them

JackLane

>DanA

I've read those reports on the Woodweb. For every rant there are a dozen raves. I've also seen them operating, day in and day out in an industrial environment and I'm sold. They're solid saws. Not perfect for sure but worth every penny, particulary if I or one of my guys became the testimonial.

Jack