Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

WC Weekend Accomplishments.....

Posts

WC Weekend Accomplishments.....

#1

WC Weekend Accomplishments.....

Dennis E. Peacock

>Good Morning Everyone,

It's time to discuss what we did over the weekend.

For me...it was work for the day job on Friday and Saturday. Friday night and Saturday night I was working on the glueup of the first curved end of the oval shaped kitchen table. I'm doing this is a "brick-stack" so I don't have to steam bend wood or find wood that would be wide enough to just cut the curve out of a single pice. The brick-stack will be better than a single piece of wood due to all the overlappy glue joints and the glue I used is the DAP Plastic Resin Glue. The stuff works great!! In short, the first arched piece is all glued up and has been set aside. I have also started the 2nd and final piece and have almost completed the 1st 2 layers of the brick-stack. The rest of the table should be a breeze compared to all this. ;)

It was church on Sunday, but I didn't play bass this week. I had the "day off" from playing which meant that church for me was only 2 hours instead of nearly 9 hours for a typical Sunday when I play.

The LOML and I tilled up the garden and moved a little dirt around in preparation of planting our garden. The kids asked to plant a garden, so we have started that process. I sure hope that this garden does better under kid control than the last one.

I have finished one bowl and have one more to turn for a donation to the National Kidney Foundation to help raise funds for a worthy cause.

Today is my day off, but I go back to work tomorrow due to some training I'm getting. I don't know why we're getting training now???!!! We've been asking for this training for about 5 years now. Better late than never I guess. :D

So what did YOU do this weekend?

Best of weeks to you all....

Dennis

Re: WC Weekend Accomplishments.....

#2

JL

Re: WC Weekend Accomplishments.....

JL

>Well - glued up a few more base cabinet carcasses. Did some yard work. Big day at church. Breakfast with the bishop as it was confirmation/reception Sunday. Dishpan hands washing the dishes from that :).

Re: WC Weekend Accomplishments.....

#3

Re: WC Weekend Accomplishments.....

John Lucas

>taught a nature photography class from 7 till noon, then replaced the air filter housing on a honda, it had stripped screws, then photographed the curtain call for the latest unversity theatre play then went to dinner with my son.

Sunday was all work, installed a ceiling fan and light in the bathroom, mowed the lawn (I only have a push mower so it takes an hour and half, then cut all the bushes, hedges and trimmed the trees. After lunch I rode 26 miles on the bicycle then took a much needed rest and finally finished rebuilding my old air compressor.

I had to come to work today to rest.

Re: WC Weekend Accomplishments.....

#4

Re: WC Weekend Accomplishments.....

David Hay @ Denver

>I spent a little time on Saturday preparing some stock to make a lamp I saw in a magazine a few years back.

Sunday was spent outside, enjoying the lovely spring weather.

Have a great week!

David

Re: WC Weekend Accomplishments.....

#5

Lumber Run

Thomas Skaggs, Foothills of Mount Level

>Just got back from a lovely trip south. Spent a few days getting some much needed R&R, soaking up some sun and hiking around southern Indiana and northern Kentucky.

But along the way picked up 400 bf of some of the prettiest curly cherry I have ever laid eyes on.

All and all a fine weekend!

Tom

Re: WC Weekend Accomplishments.....

#6

Re: WC Weekend Accomplishments.....

Keith Newton

>Arthritis and carpal-T has made it a bit painful when I need to carry heavy sheet-good. I have been thinking of making something to assist with the heavier stuff, and have come up with a neat solution.

I made a fixture that drops onto the blade of my hand-cart when it is laying on its back. It has a sheet of P/W that extends up about another 12" or so, with a slot 1 3/4" w x 12" long. There is another on the other end, near the handle to keep that end centered.

To use it. I transport and store all of my sheet-goods on edge. I can just slide a sheet out of the trailer, and feed the outboard end into the slot of the fixture. then lifting the other end a little transfers the weight a little closer to the center of balance, so there is almost no weight while rolling it along.

Whenever I get in to the TS, I turn it so that I can set the corner of the end that I have been pushing from next to the fence, where it will stand on edge, while I turn on the saw, and get to the other end.

When I lift it out of the slot, then let it tilt on over flat, I am in position to saw, and have never lifted over half of the weight, nor had to bend my back very far.

If anyone else feels a need for something like this, just let me know, and I will take and post some photos. I am not through tweaking it, but so far, it works great. I just have another simpler version in mind, that will be easier to make, and take less space to store, and can be made from scrap plywood.

Re: WC Weekend Accomplishments.....

#7

Re: WC Weekend Accomplishments.....

Chuck Lenz

>Well, I spent two days working on a newer design for dust collection on my Delta Contractors saw. The first design worked ok, better than the plastic hoods every retail tool store sells, and I thank David Yoho for posting it in ShopShots, I really do apreciate that, but I felt I needed to do alittle more to get people more excited about the design. I didn't get as many replies back as I would of liked to have seen. But then again, the majority of the people that visit this site probably have a Unisaw.

Re: WC Weekend Accomplishments.....

#8

Sun Burning Cherry Night Stands

George@Colonel's Workshop-Havertown PA

>Happy Monday Morning Dennis,

At long last I had some help in lifting our two new cherry night stands out of the shop. We set them outside in the brilliant spring sunshine on Sat and Sunday. While they cook, I am going to mill up cherry and poplar for the matching chest-on-chest. The night stands came out fairly well, and I am happy with the ease of operation and fit of the four drawers in each carcase. Have a great week.

George

Re: WC Weekend Accomplishments.....

#9

Re: WC Weekend Accomplishments.....

Stephen Kirk in Quakertown PA

>Just about finished up the drawers for a workbench project. The fit is OK, but I'm not really happy with them. I just tell myself they're on a workbench, not fine furniture. I can start finishing it this week so I can deliver it soon and get my floor space back.

I also helped move an egg washer and then enjoyed beer and grilled chicken for my efforts. Plus I got some yard maintenance in, moving old firewood, etc.

Re: WC Weekend Accomplishments.....

#10

Alan Young

So that's where I left that stash...

Alan Young

>Thanks for recovering that for me Tom. I just couldn't remember where I left that stuff. Thanks to you my tombstone won't read:

Lost lumber legacy looms large in lingering lament....

Alan

Re: WC Weekend Accomplishments.....

#11

Re: WC Weekend Accomplishments.....Wood Gloat

Chet Kloss from Livonia, MI

>LOML and I took a trip south to Union City Indiana - home of Frank Miller Lumber. For those of you who don't know, Frank Miller Lumber is one of the premier Quarter Sawing mills in the country. They had a sale at their outlet store and I picked up about 80 bdft of 4/4 Ash and 100 bdft of QS 6/4 white oak. Even with adding the price of gas and one night at the hotel, it was still about half the cost of the local mills here in southeast Michigan.

,,,,,,,,,,Chet

Re: WC Weekend Accomplishments.....

#12

Never Fear....

Thomas Skaggs, Foothills of Mount Level

>....I was curteous enough to replace it with some "Top Choice Lumber" from Lowes....every piece guaranteed to be perfect.

T.

Re: WC Weekend Accomplishments.....

#13

Re: WC Weekend Accomplishments.....

Mike Fitterling

>Went to Rays to help with some specialty hinges in the walnut/maple kitchen that we have been working on since October. It is getting close to be done.


img

Re: WC Weekend Accomplishments.....

#14

Mike.... A Favor Please?

Dave Morris

>Nice looking kitchen!

I noticed the overhead fan for the range looks almost, if not exactly, the same as the fan my brother had installed in his new kitchen remodel. Same kind of square-post frame/air-duct/support from the ceiling. He wanted the fan a little higher than normal for some extra headroom, so the frame is now shorter than the out-of-the-box decorative cover. Now he's having some difficulty figuring out if he wants to have a custom cover made (I've offered to make one for him) or have the original cover shortened.

If you make a custom cover for the fan support, could you post a picture of the kitchen with a good shot of the overhead fan when you are done? That might help him and his wife decide which way to proceed.

If so, Thank You.

David

Re: WC Weekend Accomplishments.....

#15

Re: WC Weekend Accomplishments.....

Dave Morris

>Saturday it rained hard--- all day. So, it became a "Quality Family Indoor Time" day. Good stuff.

Sunday the weather cleared, so I got some yard stuff done outside in the late morning, and had some free time in the afternoon to clean the shop a bit and cobble together an outfeed table for my BS. Quick and dirty, it's just melamine supported by an interlocking angle-stock ledger on the table side, and a couple twist-lock adjustable closet clothes rods we had occupying unused space for the legs. I'm not sure I like the rod-legs... I'm not *totally* positive they'll stay adjusted to the specific height if I put a heavy board of them. I may alter things and make stronger adjustable wood legs. They're fine for light stuff though, and everything I have planned for the next woodworking project.

Incorporated the outfeed support design to also add a couple small side extensions to the BS table, giving me a level tabletop from the blade to the saw's frame on the inboard side, and almost an extra 4" from the table's edge on the outboard side of the blade. Both extensions tilt with the table, but lift out when needed for blade changes on the right or tilting the table to the left.

Nice thing is, if I need a much wider table to the side for working across the end of a long piece of wood, I can easily make a longer side table similar to the outfeed table and rest it on the (now)existing support ledgers.

Now on to cobble up some dust extraction for the BS from some extra D/C fittings. (Thanks for the idea, Dominic!)

Dave--- trying to plan ahead

Re: WC Weekend Accomplishments.....

#16

Re: Mike.... A Favor Please?

Mike Fitterling

>Hi David,

I was not involved in the exhaust fan setup. Ray had mentioned earlier that he wanted to do a custom cover for it out of walnut, but last time we talked he was going all the way to the beam above it with stainless. The beam we are going to cover with walnut.

From the looks of the column above the exhaust hood, however, it ought to be easy enough to attach a wood cover. The sheet stainless is just a skin attached to a metal framwork and the actual exhaust goes up a duct inside the frame work. I would bet that the hood Ray has is made by Thermidor, at least that is what all the other appliances are.

Ray drops by here from time to time, maybe he will chime in with more information.

The wall of cabinets in the picture is 10 foot high and 13 foot long, and you can just see the long peninsula on the right and large island on the left. Not shown there will also be a computer work station, built-in "phone booth" area, powder room cabinets, and laundry room cabinets. It has been a challenge, so I welcome the idea to not cover the duct with wood--that much less work and time.

Cheers,

Mike

Re: WC Weekend Accomplishments.....

#17

Follow-up—another brand…

Rod Peterson -- Ormond Beach

>We (I) also put an island hood in our kitchen—a Best by Broan. Like Ray's, there is a steel frame which is bolted to the joists above and carries the weight of the hood, an inner duct (6"), and a sheet stainless outer cover (in two concentric pieces to accommodate a range of heights of installation).



Support frame for hood. 6" duct inside.





Hood installed. Note overlap of trim just below grillwork.


I agree—it should be relatively easy to fabricate wood cosmetics either over the stainless trim, or directly to the frame.

Rod