Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Disc/Belt sander question

Posts

Disc/Belt sander question

#1

Disc/Belt sander question

Stuart Hough

>I am looking to aquire amy next "really necessary,honey" toy (I mean power tool). I have seen a Delta 9" disc/6x48" belt sander at Lowe's on a markdown. I believe it has a 1/3 or 1/2 hp motor, but there was no literature with the demo model. Does anyone have any thoughts on this size unit. Should I hold out for a 12" disc model? I am still in the late novice stage, but don'r want to get something that won't be up to the task. Thanx for your considerations.

Re: Disc/Belt sander question

#2

Re: Disc/Belt sander question

Jesse in New Mexico

>I have had that sander for 5 or 6 years. It has been a real workhorse. I find the disc plenty large enough, though I use the belt way more than the disc. I have the dust port connected to my cyclone and it keeps things pretty clean.

Not sure what Lowe's is charging, but when I bought it I thought you got a lot for the money.

BTW, this is not a high horsepower operation, 1/3 or 1/2 is fine.

Re: Disc/Belt sander question

#3

Re: Disc/Belt sander question

George@Colonel's Workshop-Havertown PA

>Good Morning Stuart,

I have the same machine in Grizzly colors. The format has been fine for my shop. I had wanted to spin a 12" disc until I compared prices, and going from a 9 to 12 inch disc seemed fiscally unreasonable. After 10 or more years I am still glad I bought what I did. It is indeed a workhorse, and I'd be lost without it.

George

Re: Disc/Belt sander question

#4

Re: Disc/Belt sander question

Stuart Hough

>Thanx folks. I think I'll trot on back and buy one!