Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

"YELLOW Planing woes

Posts

"YELLOW Planing woes

#1

"YELLOW Planing woes

j smith

>It seems every time i try to plane yellow pine with my hand planes, that gouging occurs with unsitley results. the plane does well on smoother grain materials including oak. I dont know whether the grind angle is wrong or what. the sappy grain seems to be the most bother some . Any suggestions? thanks, j. smith

Re: "YELLOW Planing woes

#2

Re: "YELLOW Planing woes

Curly Smith

>A plane? Something wrong with the belt sander?

How about:

A Softwood Scraper Mystery

Chipbreaking

from Plane Basics

"The other major factor that causes problems for the novice is the depth of cut and mouth opening relationship. The mouth is opened and closed by adjusting the frog. It�s very important that the shaving is supported as it�s being sliced up and away from the surface. If the mouth is open too much, you will get tear out and chattering not opened enough it the plane will choke. The mouth opening should be just a hair over the amount of the depth of cut. In other words, slightly more than the thickness of the shaving."

Re: "YELLOW Planing woes

#3

Ellis Walentine

Make sure the iron is sharp

Ellis Walentine

>My best advice is to check your plane iron for sharpness. A really sharp blade should slice cleanly through yellow pine, assuming you're pushing with the grain and not against it. Also, take smaller bites with the plane.

Ellis Walentine, Host