Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Finished Mahogany Lensboard...

Posts

Finished Mahogany Lensboard...

#1

Finished Mahogany Lensboard...

Scott in Douglassville

>Well, I don't know if anyone's reading this or interested in the least, but it's the first woodworking project I've completed in over a year, so I'm a-postin' it.

To review, I've been making a lensboard for a rehabbed 8x10 Century. That'd be an old large format camera that shoots single 8"x10" sheet film. The lens mounts to the lensboard, which is then installed in the camera. The boards allow some flexibility in changing lenses.

This board's a three-piece one, mahogany with two breadboard ends, tiny lil' tongue-and-groove joints between:



The back is painted flat, flat black to minimize internal reflections. The T&G is a little easier to see before I cut the back recess.

Before:


After:


Sanded in a few coats of Waterlox to fill the pores a bit, and put a few more on top of that. Think I've got one more coat before I call it good.

Now I want to make one from walnut...

Thanks for looking.

Scott

Re: Finished Mahogany Lensboard...

#2

Re: Finished Mahogany Lensboard...

john lucas

>Very good job. It looks just like my original boards. What did you end up using to cut the Dado's? Are you going to shoot the 8x10 or was that for a friend?

Re: Finished Mahogany Lensboard...

#3

Re: Finished Mahogany Lensboard...

Scott in Douglassville

>Thanks, John.

I cut the dados with a 7-1/4" general purpose circ saw blade on the tablesaw. Much thinner kerf than any of the tablesaw blades I have, and it was rated for the same max speed.

I wish I was shooting the 8x10! I have a 4x5, and am fixin' to get into 5x7 so I can contact print. But 8x10's way outta my league...

Re: Finished Mahogany Lensboard...

#4

Re: Finished Mahogany Lensboard...

Dave Morris

>Wow, nice work on the joinery, Scott--- that close-up of the T&G wouldn't hide any gaps. It couldn't have been easy working with stock that thin.

Dave--- who wouldn't want some of his work looked at that closely. ;-)

Re: Finished Mahogany Lensboard...

#5

Lots of people shoot 8 x 10 ...

Jerry Nicholson

>millimeters, that is!

I never had anything bigger than 4 x 5 inches (Speed Graphics, Busch Pressman, some kind of wooden view camera). I had a 3 1/4 x 4 1/4 Graflex Reflex that I took several pictures with. All that stuff is long gone now, along with the various 2 1/4 x 3 1/4 and 2 1/4 x 2 1/4 cameras.

Jerry

Re: Finished Mahogany Lensboard...

#6

Re: Lots of people shoot 8 x 10 ...

Howard Norman-Prescott, AZ

>I always thought that it would be nice to shoot 8x10 but never got around to it. Probable never will now. Life has a way of being like that. I should have done it 40 years ago. It seems like the only pictures I take anymore are with a digital camera. And that is a mighty small sensor in that camera compared to 8x10 film.

Howard