Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Tiny Lil' Breadboards - Update

Posts

Tiny Lil' Breadboards - Update

#1

Tiny Lil' Breadboards - Update

Scott in Douglassville

>Hi, all -

Ok, to follow up on my earlier post, I finished the breadboard ends on the mahogany lensboard I'm making:



Actually turned out to be pretty straight forward, if diminutive. Milled the stock to about 3/8", installed a general purpose 7-1/4" blade from my circ saw on the tablesaw, which cuts a significantly thinner kerf, but was rated for the same max speed as my tablesaw blades, ran a groove down the center of the edge, flipped the board end-to-end and ran it again so I'd have a truly centered groove. Ended up just at 3/32". Milled the matching tongues to fit on the horizontal router table. Easy peasy. Glued them up last night with poly glue on the center ~3" or so of the joint. They're tight...

Thanks for the help.

Scott

Re: Tiny Lil' Breadboards - Update

#2

Re: Tiny Lil' Breadboards - Update

Fred West in West Chester, PA

>Hey Scott, beautiful job. What is a lens board? Fred

Re: Tiny Lil' Breadboards - Update

#3

Lensboards...

Scott in Douglassville

>Thanks, Fred.

Lensboards are used in large format photography to allow a lens and/or shutter to be changed with relative easy and quickness. In large format, ease and speed are always relative.

Here's another I made for one o' my lenses, lens installed:


img

Re: Tiny Lil' Breadboards - Update

#4

Re: Lensboards...

Fred West in West Chester, PA

>Scott, thank you I had no idea. Fred