Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Porter-Cable templet guides

Posts

Porter-Cable templet guides

#1

Porter-Cable templet guides

Johnny

>Hi! I'm new to this site here. I have a little problem and wonder if someone can help me. I'm trying to find a templet guide, one that fits on the base of a Porter-Cable router. The stock number is 42046. The I.D. is 1/2 and the O.D. is 5/8. it's used to go along the templet of an Omnijig to make 1/2 inch half blind dovetails.

I've contacted both Porter-Cable and Lowes, and neither one has any idea of what I'm talking about. I've had the jig for about 5 years and a templet guide came with it. But a couple of months ago I moved and somehow have misplaced it. I have a set of templets and one does have the outside demension of 5/8, but the protruding guide itself is too long for the dovetail templet.

Does anyone have any idea of where I could go to purchase one of these? I sure would appreciate any light that anyone could shed on this.

Thanks, Johnny

Re: Porter-Cable templet guides

#2

Re: Porter-Cable templet guides

Tom Norton

>Had the same problem and I just ground it down to make it work.

Re: Porter-Cable templet guides

#3

Don't worry, be happy.....

R. Lance in G. R., Michigan

>Go to a real tool store and look in the Porter Cable catalog and you will find this guide listed and still available.

Re: Porter-Cable templet guides

#4

Re: Porter-Cable templet guides

DickL

>Lee Valley might have it. Try item 46J92.14. $2.95.

Regards,

Dick

Re: Porter-Cable templet guides

#5

Re: Porter-Cable templet guides

Dave Arbuckle, Plano, TX

>The only thing I can think of to account for their confusion is the callout of 1/2" I.D. A 5/8" O.D. template guide would generally have a larger inside diameter than that. Which is OK because the outside diameter is all that particularly matters here.

Be aware that some 5/8" guides may have a long enough barrel to extend past your template, in which case just saw or file it down a little shorter. If you don't have a nut for the guide, get one, they are separate items.

Re: Porter-Cable templet guides

#6

WOODCRAFT!

Art Silva

>

Re: Porter-Cable templet guides

#7

Re: Porter-Cable templet guides

Johnny

>Thanks for all of your responses. What I finally wound up doing was to file one down on my grinder. The outside demension (5/8) was exactly the same as the one I was trying to find. The problem was that it was too long. I got it down to just under 1/4" (the templet on my Omnijig is 1/4"thick). Anyways, now it works great. Thanks again for all your help.