Glue Squeeze out question?
Barry Irby
>When I use glue to edge joint or almost any other application I look for squeeze out. Usually coat both surfaces and clamp up. I look closely for the squeeze out. I'm not happy if I don't get at least a little. What I'm wondering about is what percentage of the glue gets scraped off and thrown in the trash? This is sort a silly question, but I spend a lot of time dealing with it, keeping it off the surface, taping joints with masking tape and I throw it away after creating it on purpose. I think I may throw away most of the glue I "use". What do you think?



