Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Square Steel Tube for Fixtures?

Posts

Square Steel Tube for Fixtures?

#1

Square Steel Tube for Fixtures?

Tom MacGregor

>Does anyone know where to find square non-perforated steel tubes that will telescope together with the OD on the larger piece a max. of one inch? I know I'm being a little fussy on the size but I have a very specific fixture I want to fabricate.

Re: Square Steel Tube for Fixtures?

#2

Re: Square Steel Tube for Fixtures? *LINK*

John McGaw

>How precisely do you need them to telescope? If you could stand just a bit of slop or were willing to do a bit of shimming/fitting then 1 X 1 0.120 wall tubing will allow 3/4 X 3/4 tubing with any wall thickness to slide inside it with 0.01 of slop. Certainly not a proper fit for a hydraulic seal but not bad for a rough 'n ready jig.

There are several online suppliers although almost any reasonably-sized town will have at least one metal supplier who stocks or can at least order such for you.


MetalsDepot Square Steel Tubing

Re: Square Steel Tube for Fixtures?

#3

Rick L

Re: Square Steel Tube for Fixtures?

Rick L

>Mcmaster and www.smallparts.com sell telescoping tube. I've always found metal depot to be the most expensive