Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

I blew it - need a piece of scrap Cherry

Posts

I blew it - need a piece of scrap Cherry

#1

I blew it - need a piece of scrap Cherry

Joe in a Cleveland suburb

>Hi all.

I've been working on a little table for somebody (joeott.blogspot.com). The folks on the turning side gave me some tips on doing pommels. Working on the last one today, I screwed up. Long story short, I can't add the wood back no matter how hard I try. :(

When I bought this chunk of Cherry for the legs it was an off cut and just big enough to make 4 legs. I have lots of Cherry but it's all 4/4. So now I am short.

Before I try to order a piece from an online source I thought I would check to see if anybody here has a scrap piece of cherry they would like to sell and ship to me quickly somehow. It needs to be at least 31" long by 1-7/8" square.

Anybody have a piece of scrap similar to that?

Thanks,

Joe

ps - sorry for the cross post.

Re: I blew it - need a piece of scrap Cherry

#2

Re: I blew it - need a piece of scrap Cherry

Gary Evans Tallassee, TN

>Hi Joe,

I think I have a piece that would work, but I don't have it here at home. It would be a couple of days before I could go get it. If nothing else works out, let me know. I'll take care of you.

Gary Evans

Talasi Hardwoods

Re: I blew it - need a piece of scrap Cherry

#3

JL

Re: Send me an email..

JL

>and remove the NOSPAM. I've got some 8/4" with some interesting grain patterns that is about 36" or so. I'll see about a tube mailer.

Re: I blew it - need a piece of scrap Cherry

#4

If you can wait to Saturday

Dustmaker Mike

>I will be home and I know I have a piece or three that may meet your needs. This is just plain Cherry no real figure to it just some good colour. Pop me an E-mail if you want it.

Re: I blew it - need a piece of scrap Cherry

#5

A little tip, JL

Gary Evans Tallassee, TN

>You don't need a mailing tube. Just securely tape a mailing label to that stick of wood and send it on. I've done this a lot with turning wood.

Gary