Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Need tape measure recommendations

Posts

Need tape measure recommendations

#1

Need tape measure recommendations

Ken Krawford

>My Stanley tape is starting to wear out. In contemplating a replacement, I realized that I rarely measure more than 10 feet so carrying around a bulky, heavy 25 foot tape was less than ideal. I want the stiffness of a 3/4" wide tape, a belt clip and something to lock the tape while taking a measurement.

Anyone have any favorites that fit this bill?

Re: Need tape measure recommendations

#2

Re: Need tape measure recommendations

DickL

>Fastcap. About $6 - $7 at Amazon. I have the 16 ft one with scales on both edges so you can use it either right or left handed. Comes with the usual lock plus a brake on the bottom, belt clip, a place to write notes, and a pencil sharpener. Check out their glue bottles too.

Regards,

Dick

Re: Need tape measure recommendations

#3

Re:Agree

Guy Kroll

>DickL, you are right, Fast Cap has a good product. I also have the 16ft and the Flat Tape. Both are good.

Guy

Re: Need tape measure recommendations

#4

Another vote for FastCap...

Brian in Sandusky, OH

>It seems that they really have done their homework in providing cabinetmakers with little tweaks and improvements to existing products, as well as their own unique products that are useful.

This includes their tape measures. Metric, standard, room to write for a story pole, and most important to me...the flat tape.

As cabinetmakers, we rarely really need a tape measure to be stiff when it extends. Why someone didn't think of this earlier, I don't know.

Not to say that I never use a standard stiff blade for some work, but that flat tape is the one that I reach for 95% of the time.

My only suggestion to them is that I would like to have a flat tape that was perhaps a little more narrow, and maybe 12-13 feet, making it a little smaller in the hand.

Re: Need tape measure recommendations

#5

Re: Need tape measure recommendations

DizC

>I picked up a Stanley MaxSteel Contractor grade 16' No 33-692 at one of the big box stores over a year ago (and haven't seen one since). It feels good in the hand and has the rubber "bumpers" like the 25'ers. Might want to check it out.

Re: Need tape measure recommendations

#6

An alternative

Derek

>A contractor friend told me to get a Sears Craftsman tape. He uses them because he can get a new one when the blade is damaged.

I like mine. Actually I have several and use them. I actually like the Craftsman the best. I like the size and feel.

I have not tried the brand mentioned above. Perhaps I'll get one one of these days.

Re: Need tape measure recommendations

#7

Stanley Lever Lock 16'

Charles Sharp

>

Re: Need tape measure recommendations

#8

Love my Fastcap tapes (& glue Bot)

Craig in Silverdale

>

Re: Need tape measure recommendations

#9

Lee Valley "handed" tape works well for me.

Dave Bair, Eaton Rapids, MI

>They come in right- or left-handed versions and are accurate both when pushed and pulled. When mine wears out, I'm going to try one of "Bob's" tapes with it's 1/24th inch markings.

Re: Need tape measure recommendations

#10

Re: Need tape measure recommendations

Kelly Anderson

>2nd vote for the Stanley Lever Lock. It is the reverse of most in that it is locked when the tape is out and you have to squeeze the lever to get it back in.

Re: Need tape measure recommendations

#11

Re: Need tape measure recommendations

Jeffrey D. Rose

>3rd vote for the leverlock. I love this tape. The tape stays put and no fumbling around with locking mechanisms.

Jeff in Iowa.