Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

OT: Water bladder tank capacity specs

Posts

OT: Water bladder tank capacity specs

#1

OT: Water bladder tank capacity specs

Luke Herzberg

>Does anybody know how the "equivalent rating" works on water pressure tank capacities? Many of them list a capacity, plus the equivalent tank rating. The equivalent rating is always larger, and more gallons than the tank can hold when full, not even accounting for the air bladder volume. Some brands appear to list only the equivalent number as their capacity. Real science, or marketed by the same folks that built my "5 peak hp" shop vac?

Thanks,

Luke

Re: OT: Water bladder tank capacity specs

#2

Re: OT: Water bladder tank capacity specs

Stve Evans

>Luke

The equivalent capacity is for comparisons with tanks that don't have a bladder. In a blasdderless tank, you're going to have to fill it to a certain point to have a similar pressure as is in the bladder equipped tank. The beauty of the bladder tank is this precharge amount, since a much smaller tank will perform equivalent to a larger tank, and take up much less room.

Steve

Re: OT: Water bladder tank capacity specs

#3

Re: OT: Water bladder tank capacity "Real Science"

Larry Clinton At Frankfort (Central)., Indiana

>The ratings are accurate as far as I could tell when installing them - I was a Contractor Plumber in Indiana for several years - (second job). These (bladder type) tanks have many advantages over the old water only filled tanks. First, they do not require infusions of air due to the water adsorbing the air as in the tanks without bladders. This allows them to be installed anywhere in the plumbing system. - You can put one (or more) under the sink, at the end of your water line under the house etc. The addition of "extra" tanks will cause your pump to run longer during fill, and allow much more water to be drawn between pump starts. Second, Since the tanks do not require continual air additions, they have far fewer parts to malfunction - and do not become "waterlogged" unless the bladder breaks/leaks. Additionally they can exhaust almost all the water held in the tank without undue pressure drop - allowing for much smaller tanks serving the same function. IE: Cause of the surprising ratings in capacity VS non-bladder tanks.