Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Who created The Shrinkulator?

Posts

Who created The Shrinkulator?

#1

Who created The Shrinkulator?

Sgian Dubh

>I'm writing a large manuscript on timber technology and I've used The Shrinkulator as a reference. I've listed it in my bibliography but I'd very much like to credit the author of the software, and give the date of its publication.

So if you are the author and read this message, or know who the author is, do please reply here, or drop me a note offline so that I can give him or her full credit for their work.

If you do drop me a note offline my somewhat disguised email address is above. And thanks in advance for any help you might be able to provide. Slainte.

Re: Who created The Shrinkulator?

#2

For Eddie Pacheo

Ken Oakley-Sunny St. Cloud, Fla.

>Can you imagine some of the replies I could give to this if it wasn't such a family orientated forum. Biting my tongue and typing fingers.

Re: Who created The Shrinkulator?

#3

Re: For Eddie Pacheo

Sgian Dubh

> "Can you imagine some of the replies I could give to this..."

I'm afraid I can't Ken.

You'll have to enlighten me, notwithstanding the fact sensitive kiddies, vaporous ladies and timid horses might be watching, ha, ha. Slainte.

Re: Who created The Shrinkulator?

#4

Re: Who created The Shrinkulator?

Howard Acheson

>Richard, I would send a note to the "Contact" point referred to on the Woodbin Site. (www.woodbin.com)

Re: Who created The Shrinkulator?

#5

Re: Who created The Shrinkulator?

Sgian Dubh

>Good suggestion Howard. I did that earlier in response to someone elses same off-forum suggestion.

I'm not sure how I missed the contact button on one of my visits to The Shrinkulator, but I did. That shows how dumb I can be sometimes, ha, ha. I could always argue that it was hidden in plain view---- but that excuse probably won't fly. Slainte.

Re: Who created The Shrinkulator?

#6

Re: For Eddie Pacheo

Ken Oakley-Sunny St. Cloud, Fla.

>You'll have to enlighten me,

Wait til you reach the Golden Years. You will be able to think up the same replies

Re: Who created The Shrinkulator?

#7

Whoa, don't include me in them golden years!

Eddie Pacheco, San Jose, Ca.

>C'mon, I'm only 53 and I'm Latino! You know, the other dark meat..:-O

Re: Who created The Shrinkulator?

#8

"HEY, the water was really COLD"

Mark Goodall - ATL - tooljunkie

>

Re: Who created The Shrinkulator?

#9

Re: "HEY, the water was really COLD"

Ken Oakley-Sunny St. Cloud, Fla.

>Great minds think alike-----

Re: Who created The Shrinkulator?

#10

Re: Whoa, don't include me in them golden years!

Ken Oakley-Sunny St. Cloud, Fla.

>So that's why there are so many of you

Re: Who created The Shrinkulator?

#11

Re: For Eddie Pacheo

Sgian Dubh

>Ken, I guess I'll just have to wait for those 'Golden Years' whatever they may be.

I just don't 'get' any of the responses from anyone since Howard made his helpful contribution.

All the responses, apart from Howards, are perplexing and nonsensical to me.

There was a time, four to eight years ago, when I frequented and contributed to this forum much more than I've done for the last four years that I might have got whatever the joke is that you're all tossing backwards and forwards.

I guess I'm rather out of the loop and don't understand what's so funny, peculiar, nonsensical or inane about the question I posed. Slainte.

Re: Who created The Shrinkulator?

#12

Re: For Eddie Pacheo

Ken Oakley-Sunny St. Cloud, Fla.

>Sorry, but I have developed a wierd, warped sense of humor in my old age and the word Shrinkolator just seemed right to get me going. Sorry if I confused you and that I can't answer your question. I have no idea what a Shrinkolator is so I quess that makes two of us that are confused. Maybe I should go cut some wood.

Re: Who created The Shrinkulator?

#13

Re: Who created The Shrinkulator?

Gary Evans Tallassee, TN

>Richard,

Your post inspired me to do a little research. While I didn't discover the answer to your question, I did find a reference which stated that the Shrinkulator was based on information from one of the National Forest Labs publications. Could be that someone there was the author. Might be worth an e-mail.

Gary

Re: Who created The Shrinkulator?

#14

I apologize, Sgian,

Eddie Pacheco, San Jose, Ca.

>For participating in the hijacking and misdirection of your original post. Your posts have certainly been informational to me in the past.

Ken Oakley and I sometimes see a post that is ripe for an offcolor, close to the gutter (if not in) interpretation.

Re: Who created The Shrinkulator?

#15

Re: Shrinkulator was created/authored by...

Al Stokka - Cambrige, Iowa

>Shrinkulator was created/autored by Bill Kovalick, owner of www.woodbin.com. You can read a bit about him at:

http://www.woodbin.com/docs/index.htm

Al

Re: Who created The Shrinkulator?

#16

Re: Shrinkulator was created/authored by...

Howard Acheson

>That's what I though too. But, I wasn't sure.

Re: Who created The Shrinkulator?

#17

Re: Shrinkulator was created/authored by...

Sgian Dubh

>Thanks Al and Howard for that. You are both indeed right in that Bill Kovalick created The Shrinkulator. This has today been confirmed by him in response to the enquiry I sent to the Woodbin 'Contact' button-- thanks for that suggestion Howard.

And finally to Ken, et al, the penny suddenly dropped concerning your ribald(?) humour, Golden Years, and The Shrinkulator. I'm sorry it took me so long to twig what it was you guys thought was so funny.

Anyway, the question my original post posed has been answered. Thanks. Slainte.