Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Delta Unisaw Arbor question

Posts

Delta Unisaw Arbor question

#1

Delta Unisaw Arbor question

Glenn J

>I inherited an older Delta/Rockwell Uinisaw (SN: 667:XXXX), probably manufactured in 1948. It has a large 1HP motor w/an oblong frame opening. The arbor has two distinct threads, with a finer thread for a thread-on adjustable flange that probably abuts a (missing part) lock washer. My local dealer said there's no such arbor/flange combo, insisting that the inner flange is a solid part of the arbor on all Delta Unisaws. I checked the Delta site and all exploded manuals seem to support what my dealer told me. Any ideas regarding this issue? Thanks, Glenn Junkert


img

Re: Delta Unisaw Arbor question

#2

Re: Delta Unisaw Arbor question

Phil Thien

>You may want to ask this question over at OWWM.COM (Old Wood Working Machinery) site. Almost everyone there has taken their Unisaw apart at one point or another. :)

Re: Delta Unisaw Arbor question

#3

Re: Delta Unisaw Arbor question

Glenn J

>Thanks very much for the referral! -- GJ

Re: Delta Unisaw Arbor question

#4

Re: Delta Unisaw Arbor question *LINK*

Phil Smith

>You may want to look at this series of post on OWWM.com. I think that it describes the arbor you have.


Unisaw arbor

Re: Delta Unisaw Arbor question

#5

Re: Delta Unisaw Arbor question

Glenn J

>Phil: Thanks very much for the reply and the photo links. In response to Phil Thien's suggestion, I posted this same inquiry at owwm and got good instructions for adding a clip to the arbor. Regards, Glenn Junkert