Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Cabinet Doors with Glass Panel

Posts

Cabinet Doors with Glass Panel

#1

Cabinet Doors with Glass Panel

Howard G

>I'm going to make a few for the first time. Have done tons of raised panel. What router bits are right for this. I see Freud sells a set for divided lights(which I assume the key here is that it makes the muttons)but I also see they make a recoverable bead set(am I correct that this is only for a solid panel of glass?). Appreciate your help on this.

Re: Cabinet Doors with Glass Panel

#2

Re: Cabinet Doors with Glass Panel

Bill Hylton

>Howard,

Bill Hylton's Frame & Panel Magic, a book you should be able to buy through amazon and other on-line booksellers, has a chapter on making glazed doors. It's got info on using sash bits and specialized cabinet-door bits, including the recoverable-bead bits and Marc Sommerfeld's bits that make cuts for glazed doors with a rubber retainer. It explains how to alter a standard cope-and-stick set to make frames with a rabbet instead of a groove. And it covers the Freud and CMT/Lonnie Bird divided lite bits. Also shows how to rout loose-tenon joinery to reinforce cope-and-stick constructions.

Talks too about profile proportions and appearance. A key difference between recoverable bead bits and divided lite door bits is the profile scale and finished appearance of glazed assemblies made with them. What looks okay for a single-pane door doesn't always look right in a divided-lite door.

Book's worth its weight in screwed-up door parts and bits you wish you hadn't bought. (Even if I do say so myself!)

Bill

Re: Cabinet Doors with Glass Panel

#3

Re: Cabinet Doors with Glass Panel

Clint Searl, at the base of Haycock Mtn

>Unless you're doing divided lights, an easy approach is to complete the frame, run a rabbet around the back inside, and set the glass with little quarter round or aluminum angle stops.

Clint

Re: Cabinet Doors with Glass Panel

#4

Re: Cabinet Doors with Glass Panel

Charles M

>Howard,

As Bill said, the primary difference in terms of the finished door is that the divided lite set makes a narrower profile (and thus narrower muntins) and the recoverable bead set makes a grain matched bead to retain the glass. Freud also offers the new 99-286 which has the same profile as our 99-261 rail and stile set and allows the use of plastic glass retaining strips. This is a new design that makes a stronger joint because it produces a thin stub tenon which fits into the groove for the plastic bead.

Charles M

Freud America, Inc.

99-286:


img