Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Some woodworking involved.

Posts

Some woodworking involved.

#1

Some woodworking involved.

Don Henthorn

>Not a lot but it was a fun project. Here is a set of chimes I just completed and hung by the back door.


The hanger disk is turned from laminations of unknown wood from the borg. The clapper is turned from an old piece of claro black walnut and made to slide up the string and attach to the hanger disk with a rare earth magnet to serve as a shut off switch. The sail is cut from a piece 1/4" plywood junk from the borg. I designed the sail by making a fat treble clef that would catch the wind. Took a while to get it so it pleased me. The tubes are of a special aluminum alloy and they really sound good. More of craft project than fine woodworking, but I enjoyed it and am now making a set for my son.

Re: Some woodworking involved.

#2

Re: Some woodworking involved.

Glenn Madsen near San Francisco

>Those look very nice, Don. There's a set in my back yard, that came from the garden center. The garden center is very proud of those items, and you should be too!

Re: Some woodworking involved.

#3

Re: Some woodworking involved.

George@Colonel's Workshop-Havertown PA

>Hello Don,

There is something about wind chimes which makes me feel good. We have always had a set or two. I hardly ever hear them anymore, except when they are taken down for shining. Then I can hear the silence.

George

Re: Some woodworking involved.

#4

Re: Some woodworking involved.

Ken Romines

>Don

Cool idea!! I have already bought some heavy copper tubing to make a set of chimes. Did you try to tune the pipes or are they cut radom lenghts? I really like the sail at the bottom--that is a really neat idea.

Thanks

Ken

(In Lubbock, where the snow has melted, and the sand will blow on the week end.)

Re: Some woodworking involved.

#5

Re: Some woodworking involved.

Don Henthorn

>Ken, I found a place where I can buy the tubes already tuned to almost any scale you want. This is straight old pentatonic scale like the black keys on the piano.

If you need any help with ideas or techniques there is a good Yahoo forum. E-mail me if you want the URL.

Re: Some woodworking involved.

#6

Re: Neat! Don, nice piece of work

Larry Clinton At Frankfort (Central)., Indiana

>I'm sure both you and your wife (and neighbors) will enjoy this for years. Unique "sail", I like it!

Re: Some woodworking involved.

#7

Re: Some woodworking involved.

Dutch

>Did something like this for a neighbor's child a few years ago(school Project).Found that copper doesn't sound good at all,ended up using thinwall conduit,sounded much better.There may be something better, but we were on a time limit and never tried anything else.

Dutch.

Re: Some woodworking involved.

#8

Dutch, copper must be the right kind to sound good

Don Henthorn

>Good copper actually has a more mellow sound than aluminum. You need drawn copper not extruded copper and it should be thicker not thinner. Type L 3/4" to 1" copper tubing from the borg will actually make pretty good sounding chimes. Where you drill the mounting holes on each pipe (not the same for each pipe) and how you hang them for the striker to strike the right spot on each chime is the secret. It is not as simple as one would believe.

Re: Some woodworking involved.

#9

Re: Some woodworking involved.

Ernie Miller

>I like it what did you use for string? I have several sets of vintage or antique ones that need restrung I don't really like the way fishing string looks.

Re: Some woodworking involved.

#10

Ernie, I used a 250 lb test dacron cord

Don Henthorn

>with a nylon center. It is pretty abrasion resistant.