Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

On Topic at last--Bearing question

Posts

On Topic at last--Bearing question

#1

On Topic at last--Bearing question

Gary Evans Tallassee, TN

>Hi all,

I have a Delta narrow belt/disc sander, model #31-340. It has a Delta label 1/3HP motor with motor #1342608.

Anybody know the bearing numbers for this motor? I have a bad one on the output side and don't want to tear it down till I after I get the bearings.

Thanks for your help,

Gary

Re: On Topic at last--Bearing question

#2

Ellis Walentine

I'd take it to the bearing shop.

Ellis Walentine

>Over the years, Gary, I had many occasions to change bearings on machines. I found that the Delta replacement bearings are invariably more expensive than generic bearings from any well-stocked bearings and drives dealer and the Delta bearings aren't necessarily any better or different. Just be sure you get the same bearing duty type (or whatever they call it), as there are some that are sealed to different degrees.

Failing that, a call to Delta should get you the info you want and probably a replacement in the mail right away.

Ellis

Re: On Topic at last--Bearing question

#3

Just did this morning...

Hoa Dinh in Alameda

>on the way to work.

Not that particular machine/bearing however.

The lower bearing on my bandsaw seized. I removed it, did a yellowpages.com search for "bearings," called up the first one that was on the way to work and that looked promising (the name was something like "ABS Industrial Supply") and read the number on the bearing to the man who answered the phone. He confirmed they had them in stock.

10 minutes and $8.70 later, I had a new set of two bearings.

BTW, bring the old bearing just to make sure, and tell the store that the bearing will be used in a dusty environment.

-- Hoa

Re: On Topic at last--Bearing question

#4

Re: Just did this morning...

Doug Reynolds in Seattle

>Reminds me of the thread on changing bearings in a Jet mini-lathe. Everybody said to get the double-sealed not the double shielded. They are available in either style in just about every size. (Hope I didn't reverse the order on the shield or sealed).

Re: On Topic at last--Bearing question

#5

Well, here's the thing.

Gary Evans Tallassee, TN

>The closest bearing store is 50 miles away and right now I am busier than a long-tailed cat in a room full of rocking chairs. I know that I can pull the bearings and buy replacements at a reasonable price, but I don't know how long the period will be between disassembly and reassembly.

The longer that time span, the greater the opportunity to lose pieces and parts, particularly given the fact that several cats call my shop home and are always surprising me by knocking various things onto the floor.

I was hoping someone else had been through this same process in the recent past and could tell me what size the bearings are so that I could pick them up and do the replacement once they are on hand.

Gary

Re: On Topic at last--Bearing question

#6

Quart Ziplock bag :>)

Phil Joines Krum,TX

>

Re: On Topic at last--Bearing question

#7

Re: On Topic at last--Bearing question

Pete LaBelle

>The longer you run the sander with bad bearings, the more opportunity you create for the bearing to seize and spin in the housing, making a big mess...........that is.....unless it is your plan so you have a reason to buy a new one instead of rebuilding the old one.

Re: On Topic at last--Bearing question

#8

Re: Just did this morning...

Don Evans

>You didn't reverse. Shielded bearings have the metal covering over the (side) race (balls). Sealed has the black material which is some form of plastic but soft (flexible). The double just indicates that this material is on both sides of the bearing which a lot of motors will only have single side sealed, especially if they are in a TEFC motor. That seal on the other side of the bearing however helps greatly in keeping the grease inside of the bearing and I don't understand why manufacturers insist on putting in single sealed when difference is only pennies per bearing.

Actually I do know the reason, it's 50 cents less per motor times the million they are going to build so that's lot of dollars over all but still dumb.

Don