Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Looking for a specific drawer pull

Posts

Looking for a specific drawer pull

#1

Looking for a specific drawer pull

jeff

>Hi all

I'm looking for a very specific drawer pull.

Sorry I can't post a picture.

It's brass and is alot like the ones used on library card files.

But no label holder.

It is about 1" wide and has 2 screw holes for mounting into a mortise on the top of a drawer lip.

Simply sticks out and curves down to grip.

Like a window lift, but narrow and drilled oposite.

Any help would be great.

Jeff

I can't seem to find them anywhere I normally look.

Re: Looking for a specific drawer pull

#2

Re: Looking for a specific drawer pull

Pat Schupbach

>Try Van Dykes Restorers or Lee Valley, they are who I go to first. Good luck!

Re: Looking for a specific drawer pull

#3

Re:Look in WC Marketplace at CS Hardware

Larry Clinton At Frankfort (Central)., Indiana

>I'm not sure exactly what size / finish you are looking for, but CS has a large selection of custom hardware that will probably fit the bill. The mission style handles appear to be what you describe. Lee Valley also has a large selection. I always use the Marketplace (in the left column of this page) to select vendors if possible. They sponsor this site and help Ellis keep it going.

Re: Looking for a specific drawer pull

#4

Re: Looking for a specific drawer pull

Curly Smith

>It sounds like you're looking for something along these lines:

Gilmore Pull

Marston Pulls

Dakota Cup Pull

Re: Looking for a specific drawer pull

#5

Re: Looking for a specific drawer pull

Clint Searl, at the base of Haycock Mtn

>Customize a library drawer pull.

Clint

Re: Looking for a specific drawer pull

#6

No luck

jeff

>Hi all

No luck with those suppliers, I deal with them all.

I'm trying to match an existing pull, so can't really substitute.

It's brass and only 1" wide.

Looks like a typical card pull, but no label holder and mounts to the top of a drawer.

Just a simple piece of straight brass shaped to a U at one end and bent to a curve.

If I can't find it, I'll try to make them.

Or maybe, change the old ones to match a new type if I can only find something close.

Jeff

Re: Looking for a specific drawer pull

#7

Re: No luck

Curly Smith

>Maybe one of these will point you in the right direction:



Bin Pull (1.10")


looks a bit small...

INSPIRATIONS LEAF FINGER PULL

(presumably there is a plainer version if the size is suitable)

Re: Looking for a specific drawer pull

#8

Re: No luck

Bill White

>AMEROCK has a pull very much like you describe. The sample board that I have in the showroom is the "INSPIRATIONS" series #1583. Though this one has a wheat motif there might be a plain one.

Hope this helps.

Bill