Rigid Drill Press Chuck
DWA
>I was using my Rigid Drill press today and low and behold the chuck stop working.
Let me ellaborate. I needed to adjust my chuck to accept a 1/2" shank. Adjusting it was not a smooth operation. It was a little sticky. However, I was successful. When I tried to adjust it to a smaller shank size it would only adust a little bit.
I tried everything I know: lubricating, opening and closing the chuck and nothing worked, so then I tried to remove the chuck but noting I've tried so far is working, and my frustration was starting to grow, so I decided to back off and cool down.
I emailed Rigid. hopefully they will have a solution for me, and I also requested a replacement chuck. Lets see how well they back their name.
My next option is to apply heat to expand it enough to help with removing it, but before I try that I thought I'd query you guys for suggestions.
I thank you for all your help in advance



