Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Which multi base router?

Posts

Which multi base router?

#1

Which multi base router?

Tom Nagl from STL

>Hi,

I'm looking at purchasing a 2 or 2 1/4 HP multi-base router and I'd like some feedback from people that have them. I was leaning toward the PC 893PK but a lot of the reviews that I've read about it say that the plunge mechanism isn't very smooth. The next highest on the list would be the Bosch 1617EVSPK. It sounds like there is the possibility for an issue with the switch on this model. I'm thinking I'd rather chance the possibility of a bad switch over dealing with a sticky plunge base all the time. Third would be the DeWalt DW618PK. I have other DeWalt tools and I like them. I just have no experience with DeWalt routers.

Are there any woodworking magazine tool tests on these? I couldn't find one.

Thanks for your help.

Tom

Re: Which multi base router?

#2

Re: Which multi base router?

Thomas Skaggs, Foothills of Mount Level

>I have the Bosch and I really like it. I have had no problems with the switch. The plunge base is smooth and works well for micro adjusting. It has a nice smooth start too.

Tom

Re: Which multi base router?

#3

DW618 3-Base Kit *LINK*

Hoa Dinh

>It is a great kit. The D-handle base gets the most used in my shop. With an offset base, it is very stable.

The plunge base, with dust collection, is very smooth.

I modified them to add dust collection to all bases.

-- Hoa


img

My DW618 Kit

Re: Which multi base router?

#4

Re: Which multi base router?

ScottS

>I bought the Bosch 1617 before the DeWalt was available. It's definitely a nice kit and has served me well for many years. If I had it to do over again, I'd probably go with the DeWalt 3-base kit. Like Hoa, I'm a fan of D-handle bases.

Have to admit, though, that my most-used router these days is my Festool OF1000. Light is right, and it has more than enough power for all of the hand-held stuff I do. The Bosch has been "retired" to my router table.

Re: Which multi base router?

#5

Why do you need...

Clint Searl, at the base of Haycock Mtn

>a plunge base? I have an old PC with it, but it's only been useful a couple times in twenty years. They're fussy and prone to problems. I also have DeWalt, Milwaukee, and Sears fixed basers. The DeWalt is fine for everyday, the Milwaukee for heavy duty and table, and the Sears for hardly anything. I usuall leave the Milwaukee in the table and use the PC as a fixed base for stuff the Dewalt can't handle easily.

Clint

Re: Which multi base router?

#6

I agree!

mdclor

>