Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Drum sander

Posts

Drum sander

#1

Drum sander

Ray Lanham

>I just bought a 22-44 Performax drum sander and for the life of me can't figure out how to attach the infeed-outfeed tables.The parts just don't seem to have any way of fitting. Perhaps I've been sent the wrong attachment arms but I don't kow.

It looks like you have the same "critter" with tables, can you please tell me how to solve the problem. If you'll give me your phone number I can call you. Or if you're so inclined you can call me 214 732-9124. I'm in Dallas, TX on CST. I'm a retired woodworking teacher but this has definitely got me stumped!

Ray

Re: Drum sander

#2

Re: Drum sander

Robert R Clough - Thorncraft

>Ray, I don't know if the 22/44 uses the same method as the 16/32. I have the latter and the tables come in two pieces. There are the arms and the table. The arms attach to the frame of the 16/32 and the table, in turn, bolts to the arms. To get to the frame of the sander, one must unbolt and remove the feeder. Once that is done, one can see holes to bolt the table arms to. Of course they require one to be a contortionist, but we're all used to that! Before you remove the feeder, bend down to check for the bolt holes. Assuming youo hav e them, I shall check tomorrow in my file cabinet in the shop for instructions. If I have them and there are bolt holes, (let me know) and I'll scan them and e-mail them to you.

rclough57@wi.rr.com

Re: Drum sander

#3

Drum sander- Just ordered the same one

Carmen

>Ray,

I just ordered the same drum sander, and yes, the infeed/outfeed tables also! I'd appreciate the benefits of your learning experience in installing those tables. You can post the answer or e-mail me directly.

Thanks in advance.