Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Bosch 3725 ROS--- worth repairing?

Posts

Bosch 3725 ROS--- worth repairing?

#1

Bosch 3725 ROS--- worth repairing?

Dave Morris

>My Bosch 3725 DVS random orbit sander has served me well for years. However, all last weekend and the last three nights after work I've been sanding my truck's lumber rack down to bare metal, and tonight the rubber hook & loop pad has finally lost it's hook. (In spite of what my wife thinks, no, it's NOT funny when the 60 grit disc goes flying off like a Frisbee.)

I'll admit I've never really paid a lot of attention to ROS posts. I mean, I had one that worked fine, although there were times when I was making large cabinets that I wished the 5" disc was bigger. But I didn't have any knowledge of other brands to offer a comparison opinion worth a spit.

The rest of the sander works fine, except for the "tingly hand syndrome" and that Pee-O-S "dust collection" bag that never really worked at all. So, assuming I can get a new pad from Bosch, is it worth it? Would it make better sense to look at a new ROS? (bigger, better?) Any suggestions on what a comparable ROS would be, since I don't have any basis for compression?

Dave--- wondering if all these Festool posts he's seeing means there really *is* a difference in brands

Re: Bosch 3725 ROS--- worth repairing?

#2

Re: Bosch 3725 ROS--- worth repairing?

Tom Stockton

>Dave,

The pads on ROS are kinda a consumable item and are meant to be replaced every so often. I like to keep tools I like running as long as possible so I would repair it. Unless your looking for an excuse to buy a new tool, then please ignore my advice. I have a festool sander and really like it but the $80 bosch was rated just below it by FWW so you could buy 3 for the price of the festool.

Tom

Re: Bosch 3725 ROS--- worth repairing?

#3

Woodworker's Supply had

Don Henthorn

>a kit of self stick hook material that I put on my Bosche ROS and I never had to buy another pad. The kit made eight or more disks.

Re: Bosch 3725 ROS--- worth repairing?

#4

Re: Bosch 3725 ROS--- worth repairing?

Dave Morris

>Thanks, Tom. I wasn't aware that the pads are meant to be a "regular" replaceable item. I've gone through several sander types before, even have a couple ancient PC 564 belt sanders that are still worth their salt. However, this is the first ROS I've had, so the issue hasn't come up for me before. Like you, I try to take pretty good care of my tools, but when I use them, sometimes they get *used*. ;-)

Dave-- glad to know a new pad isn't an uncommon item

Re: Bosch 3725 ROS--- worth repairing?

#5

Re: Woodworker's Supply had

Dave Morris

>Thanks for the info, Don. I'll check it out.

Dave--- who, for some reason, suddenly had a mental image of sticking one of these to the family cat (AKA "Hiss And Spits") and using it to buff his truck. Yeah, I know, my bad...