Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Looking for a tool holder that uses a marble

Posts

Looking for a tool holder that uses a marble

#1

Looking for a tool holder that uses a marble

Tom Pilsbury (Chicago)

>I'm sure I saw it here but a search of the boards came up empty. I recall seeing a photo someone posted of a clever tool holder they devised using a marble as the principal component. It was used to store long handled garden tools like shovels, rakes, etc.

A very useful and ingenious device. I love that kind of stuff. Can someone please help me find it again? It's almost time to start gardening again and my shed is a mess.

(Travis Bikel: "One of these days I'm going to get organizized")

Re: Looking for a tool holder that uses a marble

#2

Re: Looking for a tool holder that uses a marble

Larry Clinton At Frankfort (Central)., Indiana

>I'm not sure where to search, but I do remember several saw tills (saw storage racks) employed marbles as the "wedge" to lock the saws in position. Basically the marble is captured in a tapered groove, when the saw is inserted, it is pushed in from the bottom - lifting the marble up into the slot and away from the saw, when the saw is in position and lowered slightly, the marble rolls down the inclined groove against the saw "wedging" it against the other side of the slot. Might try posting on the hand tool messageboard - I'm sure they could point you in the right direction.

Re: Looking for a tool holder that uses a marble

#3

Re: Looking for a tool holder that uses a marble

Ron Hildreth, Alta, Iowa

>Tom,

Try Sears, under Lawn & Garden or Garage Oganization or some simular heading. Maybe just do a search within the Sears web site. Seems to me I saw something like that while looking to find a rizer block for my 14" crapsman bandsaw, which I found Sears doesn't make!! Go figure!!

BTW-Anyone know of a rizer block made by someone else that will fit my Crapsman professional bandsaw, Model 137.224240 ??? Sure would like to gain more resawing capacity than the 5 1/2" I'm able to achieve now!!

Ron in Iowa

Re: Looking for a tool holder that uses a marble

#4

bandsaw riser

Tom Dunlap

>My Dad took his BS apart and made up a couple of plates using the BS as a model. Then he cut a piece of thick wall tubing for the riser. A few dollars at the weldor and he had a riser cheaper than purchased.

Re: Looking for a tool holder that uses a marble

#5

Here's Lee Valley's take on that design...  *LINK*

Brint in Atlanta

>


Gripit Tool Holder

Re: Looking for a tool holder that uses a marble

#6

Here's another one  *LINK*

Yonak

>


Magic Holder