Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Resaw blade for 24" bandsaw

Posts

Resaw blade for 24" bandsaw

#1

Resaw blade for 24" bandsaw

AD

>Hi all,

I have a 24" Agazzani and do a lot of re-sawing. I was using a stellite tipped 1 1/2" blade with about a 1/16" kerf and smooth finish but it fatigued very quickly and was a throw away after only 2 sharpens ( $400 Aust blade). Can anyone recommend a blade of around 1 1/4" - 1 1/2" that has a similar kerf (or thinner). On my 14" I have used a woodslicer and that was ok but any opinions on carbide tipped or other options.

TIA

AD

Re: Resaw blade for 24" bandsaw

#2

Re: Resaw blade for 24" bandsaw *LINK*

albertabob

>Have a look at these blades.

I have used them on my 14" for about 5 years and the blades life seems to be pretty good.

Bob


Supercut resaw blades

Re: Resaw blade for 24" bandsaw

#3

Re: Resaw blade for 24" bandsaw

Ted Wong

>I think everyone has their favorite brand. But I've never understood the need for a resaw blade greater than 1/2" wide. I've used that size for the last 10 years and hvae always had good results.

Re: Resaw blade for 24" bandsaw

#4

It has been bandied about by many pros

Don Henthorn

>that the wider the re-saw blade the better. I have never seen any scientific evidence presented for that and most people take it for granted. I guess that may be true for someone who just saws and can't take time to treat the machine right. I always found that if the blade wis sharp and set right any width blade cut as true as the North star.