Carlo Venditto
Frank Orfanello
>I was a big fan of Jesada router bits when Carlo owned the company. Does anyone know what Carlo is doing now? Is he making bits?
Thanks
Knowledge You Can Build On — Est. 1998
Carlo Venditto
Frank Orfanello
>I was a big fan of Jesada router bits when Carlo owned the company. Does anyone know what Carlo is doing now? Is he making bits?
Thanks
Re: Carlo Venditto *LINK*
Alan in Little Washington (NC)
>He retired, but his son owns/runs Infinity Tools. They outsource most of their product- reviews and reports are that they are very good however.
Infinity Tools
Re: Carlo Venditto
Charles Self
>I've used some of their blades: they are excellent.
From Tool Trend?
Charles R. Smith n Victoria
>Is this the chap who ran a company in Toronto called Tool Trend? I thought he had a daughter, and that it was his brother who lived in Florida who made router bits (that were orange in colour). Or have I got the story messed up?
Re: From Tool Trend?
Charles Self
>Very messed up. But it's a messed up story. I know nothing about the Canadian connection, but Carlo's story, and company list, is a bit convoluted. He was involved with Freud's start-up, and red blades and bits, then somehow CMT came into being (these are the orange bits, by the by), and then...Jesada and white bits. The Carlos retired and his son started up with Infinity, and nickel plated blades.
I'm leaving something out there, I'm sure. One big advantage to the whole tale is that woodworkers ended up with many more excellent blade and bits from which to choose.
Re: Carlo Venditto
Frank Orfanello
>Thanks, I didn't know about his son's business. I'll check them out.
The big lawsuit…
Rod Peterson -- Ormond Beach
>…is what you left out. As I remember the story, Carlo was the US distributor of the CMT (Italian made) router bits. Somehow they had a parting of the ways and he started up a CMT clone (both the name and the color, as I recall—I don't how he thought that was going to work). Not surprisingly, CMT sued, not only over the name but also the characteristic orange color.
I don't remember if the suit was settled or if a judgement was entered, but in the event, Carlo changed the name of his company to Jesada (based on the initials of his children's names) and adopted the characteristic white color.
Somewhere in my archives I have a usenet post from the wreck (rec.woodworking) in which David (I think that was his name), apparently the “Da” of Jesada, explained his relationship with the post-Carlo Jesada and the vision of his company, Infinity.
The foregoing subject to the fog of time.
Rod
Re: The big lawsuit�
Charles Self
>I think yours is fairly accurate. I think Carlo expected to "get away with it" because the original CMT was an Italian company and he was the founder of the U.S. model. I haven't talked to him in a bunch of years, though, so my memory probably has some major holes in it.
Here is David's post.
Rod Peterson -- Ormond Beach
>Posted on usenet (rec.woodworking), 14 November 2005:
| Hello Frank, In response to your question, my father Carlo sold Jesada Tools about 4 years ago. The people who bought the company from him did not have much luck with it and are no longer in the business. At Jesada I worked in the manufacturing division where I was responsible for tool design and production. Infinity Tools was started about three years ago and is an American company. We design and engineer all of our cutting tools in-house (Clearwater, Florida) to ensure the best quality possible. We currently partner with American, Italian and Taiwanese facilities to produce to our exact specification. As far as our quality and value are concerned; Infinity was founded on two guiding principles, only the highest quality, only the best service. In fact, if you or any forum member would like to try our products, I'd be happy to give you 30% off any selection of router bits until the end of this week. I would only ask that you post your opinion of our products on the forum for others to view. As always, if you have any questions you can reach me directly at the office at 877-872-2487. David Venditto p.s. |
I don't remember who “Frank” was—one could search the newsgroup archives if it were really important. I spoke briefly with David at the woodworking show in Tampa that year. He seemed a very genuine and personable individual. That meeting notwithstanding, I've had no experience with the company or the tools. I'm merely relaying information which might be helpful.
Rod