I built a composite deck...
ScottS
>I built a composite deck two years ago... and I wouldn't do it again! I used Trex Brasilia, it's the stuff that kinda looks like wood... for the first 10 or 15 minutes you see it... if you squint. My deck is at ground level and about 300 sq. ft. I used pressure-treated lumber for the underpinnings. Trex said joists could be placed 16" on center; I went with 12". I used Eb-Ty hidden fasteners to hold the deck boards in place and TrapEase screws where necessary. Most of the deck boards are the "burnished amber" color, with "cayenne" used for accents, fascia boards, etc.
The deck looked pretty good when new, but two years on... and I'm wishing I'd gone with Ipe, Meranti, or another exotic. The surface of the Brasilia seems to be only 2 or 3 molecules thick and scratches easily. Scratches are very noticable, because the interior of the boards look nothing like the exterior. The decking stains easily and almost anything you do to clean it will discolor or ruin the surface of the boards. Olympic Premium Deck Cleaner does do a good job of cleaning if applied very sparingly (I apply a fine mist with a pressurized garden sprayer); apply too much and you'll discolor the Trex. When clean the decking looks pretty good, though you wouldn't mistake it for wood. The Burnished Amber color is the more realistic of the two; the Cayenne looks fairly unnatural to me. When it's dirty, which is most of the time thanks to my dogs, I find that it looks amazingly artificial. I thought spacing joists 12" on center was going to be overkill, but in the end I was glad I did it; I've seen wet noodles that were less flexible than Trex! Carrying a 20' board by yourself requires grabbing it in the middle and holding your hands straight up in the air; if you're lucky the ends won't sag enough to touch the ground. I swear there are some areas where I can see sagging between the joists, but everyone tells me I'm imagining it.
Other than the frequent cleanings, the deck seems to be relatively trouble-free. You may hear that it gets hot in direct sun, but I haven't found that to be the case. The Trex decking might be slightly hotter than the wood decking it replaced, but it's not bad. I have one fascia board that seems to be delaminating along the top edge; not sure why and it's the only one I've had any trouble with. Eb-Ty fasteners were a bit finicky at first, but once I got used to them it went pretty quickly. The downside to them, and probably any hidden fastener, is that all of the boards are inter-locked. So if you need to repair/replace a board in the middle of the deck... things get interesting. Seeing how scratch-prone the Trex Brasilia seems to be, I almost wish I'd used screws rather than the Eb-Ty fasteners. The TrapEase screws matched the decking very well and worked exactly as advertised.