Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Dewalt model 733 problem

Posts

Dewalt model 733 problem

#1

Dewalt model 733 problem

Dale Stillman

>I have had this model of planer for 6-8 yrs. I am now getting a 'clicking' noise as I plane. It also feels like a slight 'bump' when it clicks. The brushes & knives are good & set right. Any Idea what is causing this? TIA for the help.

Re: Dewalt model 733 problem

#2

Any Problem With Planed Stock?

George@Colonel's Workshop-Havertown PA

>I don't know if we have enough info, Dale.

Do you experience the "clicking bump" when the motor is on but nothing being fed to the knives? My #733 has been in constant use for 10 years and has not manifested problems which you describe. I presume you have checked the knife alignment and cleaned the rollers.

George

Re: Dewalt model 733 problem

#3

Re: Dewalt model 733 problem

Al Stokka - Cambrige, Iowa

>I'll take a wild guess that it is caused by a wood chip in the drive chain or sprocket. If the sound were connected to the cutterhead, it would sound more like a buzz, due to the speed of rotation.

Al

Re: Dewalt model 733 problem

#4

Re: Dewalt model 733 problem

HC Sakman

>Graphite bushings are worn and axis of the in and/or outfeed rollers are loose in these bushings and that's where the clicking is coming from. if you overload it slightly, you'll break a sprocket and/or the drive chain.

Fed workpiece shortly pauses when it clicks, right?

If so, that is what I said.

Chico...

Re: Dewalt model 733 problem

#5

Re: Dewalt model 733 problem

Dale Stillman

>When I take a very light cut, or when the unit is powered up w/no wood going thru, this 'clicking' does not happen. It just takes place when trying to remove a normal amt. of wood. Hope this helps.

Re: Dewalt model 733 problem

#6

Re: Dewalt model 733 problem

Dale Stillman

>Thanks Chico, you hit the nail on the head.

Re: Dewalt model 733 problem

#7

Re: Dewalt model 733 problem

Jim Shaver - Oakville, Ontario

>A combo Felder would be the solution I think Chico!

:-)

Take care,

Jim