Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

New Shop Vac is Quiet!

Posts

New Shop Vac is Quiet!

#1

New Shop Vac is Quiet!

George@Colonel's Workshop-Havertown PA

>Good Afternoon Friends,

And so it came to pass that the 14 year old Craftsman crapped out. Actually, the motor is going strong. But the hose's plastic ends broke off at the accordian folds and I was using my supply of duct tape to keep it operational. Finally I can't find one of the loose ends, and replaced the unit with a 12 ga, 5 hp (maximum delivered) Ridgid. It is amazing how quiet it is by comparison. Unfortunately, the hose is more "ridgid" than the old Craftsman, and has one dissimilar end, and that fits my router table DC fence port. If I can find the missing end, I'll use the old vac in the lathe/Neanderthal Shrine room, as well as at the router table. Mine was one of the very few Craftsman power tools which worked well--and long. I have a Ridgid aversion to that label now.

George

Re: New Shop Vac is Quiet!

#2

Re: New Shop Vac is Quiet!

wayne Lubbock Tx

>I have one of those Craftsman vacs and it is going on 15 years. Makes a "bunch" of noise but really sucks. Are you trying to find a hose? I think that sears sells the hose seperate.

Re: New Shop Vac is Quiet!

#3

Re: New Shop Vac is Quiet!

Thomas Skaggs, Foothills of Mount Level

>Good Afternoon Colonel,

It appears that you have filled our vacuous heads with knowledge. Congratulations to you on your new purchase. Glad you didn't get hosed.

Tommy

Re: New Shop Vac is Quiet!

#4

Cut Off My Nose To Spite My Fac e?

George@Colonel's Workshop-Havertown PA

>Good Afternoon Wayne,

I swore I'd never even set foot within another Sears Store in my lifetime. It is probably improbable I'd feel differently forever afterwards. As Tommy suggested, I don't want to get hosed again. :<)

George

Re: New Shop Vac is Quiet!

#5

Mine is anything but Quiet!

Charles Sharp

>I've had mine for several years now perhaps something has changed. Mine makes so much noise that my family closes the door and shuts all the windows when I start it up.

Re: New Shop Vac is Quiet!

#6

Me Too

Ken Oakley-Sunny St. Cloud, Fla.

>I haven't bought from Sears in over 10 years and will probably go to my grave without ever stepping into another Sears. I am getting close to making the sane decision about Home Depot. By the way Emerson Electric which also makes Rigid was the primary manufacturer of Craftsman machines until Sears decided to go overseas for suppliers. I still have a Craftsman 6" X 48" belt sander, I purchased in 1963 thst still works great, also a 4" X 24" belt sander bought in 1968 and a 12" Craftsman wood lathe that may have been used by Noah and my fathers 6"Craftsman metal lathe he bought in 1947. All work great. Everything else is Delta and Porter Cable.

Re: New Shop Vac is Quiet!

#7

Steven Antonucci

Add me to the list of "Never again"

steve antonucci

>I've told the tale of the exploding battery charger and the woes of warranty before, so I'll not rehash, lest my ire I want to be gettin' up...

I be believin' that it four long yars, might'n be longer since they've seen the likes of me.

Steve

(who felt like writing like a pirate for some odd reason...)

Re: New Shop Vac is Quiet!

#8

Re: Add me to the list of "Never again"

Stuart Johnson

>I haven't bought at Sears since 1986 when they tried to convince me they had to replace the break line on my Rabbit. They had to do it right then because it would be dangerous to drive it away. The service manager even pointed to the back of the shop and said you could see it hanging down from where we were standing. Now I'm not real good at working on cars but I do know the difference between a CB radio antenna cable and a break line.

Re: New Shop Vac is Quiet!

#9

Lee Gordon

Re: New Shop Vac is Quiet!

Lee Gordon

>If you'd like to replace your old vac with one that is nearly as quiet as the dead one (in it's current dead state, I mean) but works like a champ, I'm not going to name names but there is one that you would feel Fein about owning.

Re: New Shop Vac is Quiet!

#10

Watchit Gordon!

George@Colonel's Workshop-Havertown PA

>The pun police will fien you :<)

George

Re: New Shop Vac is Quiet!

#11

I Mean Watchit Lee! Sorry

George@Colonel's Workshop-Havertown PA

>

Re: New Shop Vac is Quiet!

#12

Re: Add me to the list of "Never again"

Verne in Northeast NJ

>The second replaced motor on our under 1 year old Kenmore dishwasher (this was a new replacement of our original brand new dishwasher that died after one week) has convinced us never to buy a Sears appliance again. We have all Kenmore appliances, and have had good luck in the past. Time came to replace them, and the new ones are terrible. Either they've had to be serviced, or the performance is inferior to the older models.

Oh, and the 1 week wait for a service appointment from Sears(fortunately my wife purchase the extended warranty on the dishwasher) is a pleasure too.

Re: New Shop Vac is Quiet!

#13

Re: Add me to the list of "Never again"

Glenn Madsen near San Francisco

>Well, not for tools or appliances. We bought the grandkids some clothes at the holidays.

By the way, the auto service department may be, or have been 'leased' to another vendor, at least at one time. They got themselves mightily whacked by the California authorities for some of their no good activities, IIRC. Lots of fines, penalties, news press, etc.

My Rabbit never had a problem with the radio cable, but we did blow a head gasket on the diesel, about 180k miles into its history. I gave the car to a friend of one of my sons at about 230k miles. Ran another year, at least.

Re: New Shop Vac is Quiet!

#14

Re: Watchit Gordon!

Nelson

>Go ahead and Fess up and by a good Tool.

Re: New Shop Vac is Quiet!

#15

That's "FEZ UP"..!

HC Sakman

>

Re: New Shop Vac is Quiet!

#16

but if ya want to keep it ugly but quiet..

Mike King, Sherwood Park, AB

>You can invest a pair of old pants, a honey pail and end up with something like this-

and BTW, I oil the 'lifetime' bronze top bearing on this thing. It's likely 15 or so years old.


img

Re: New Shop Vac is Quiet!

#17

muffler

Joe Piotrowski - Chicago Burb's

>I once saw a rigged up muffler made with PVC in a WW magazine a few years back. it could have actually been Wood.

since mine sounds like a 747 revving up to take off on a short runway, I should look into that...

Re: New Shop Vac is Quiet!

#18

Re: muffler

Bill White

>I bought the Ridgid vac muffler the minute I saw it. Stupd thing works, and my 12 gal. vac has seen a lot of use in the last 7/8 years. I did buy the "super filter" whatever they call 'em.

Bill

Re: New Shop Vac is Quiet!

#19

sweet

Joe Piotrowski - Chicago Burb's

>I imagine it would fit my craftsman but if I have to buy another shop vac, oh well. I can dedicate the old crapsman to household chores