Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Drill Press recommendations

Posts

Drill Press recommendations

#1

Drill Press recommendations

Mark Kauder, Phenix City, AL

>I have a cheap $99 truckload sale at the local Holiday Inn sort of Drill presses. I have had it for 4-5 years. I replaced the 1/2hp motor with a VS DC motor some years ago. It has about 12" swing, if that and is floor standing model.

I don't need precision drilling, and a good thing too, because the run out on it is horrid, but it has done what I need. Until now.

I would like to so some stuff that would need good precision, and more power.

I am not looking for something terribly expensive. I have not really needed the capacity that a floor model has, and would be perfectly happy with a benchtop model, if that is all I sacrifice.

Suggestions?

Mark

Re: Drill Press recommendations

#2

Re: Drill Press recommendations

John Veerkamp

>Mark,

I have a Jet 14" floor model that works really well. not too expensive either. Bought it at Woodcraft with their 10% off birthday coupon a few years ago.

John

Re: Drill Press recommendations

#3

Re: Drill Press recommendations

Mark Kauder, Phenix City, AL

>That's a thought my birthday is coming up next month.

Mark

Re: Drill Press recommendations

#4

Re: Drill Press recommendations

Glenn Madsen near San Francisco

>And I bought the 16.5" Delta version at the same sort of sale, about three to five years ago. It's been fine. Changes speeds with changing the belts at the top. Maybe once a year, I change those speeds. No big deal.

The floor standing part makes sense in my shop, because I don't have place to put a benchtop. I can horse the DP around pretty easily, when it's in the way.

There are better ones, but I didn't want to spend more than the $350 I spent. At least, not on the drill press.

I think Rockler has a 10% off sale in three weeks or so. Somebody usually has one, every couple of months. Be patient.

Re: Drill Press recommendations

#5

JL

Re: Drill Press recommendations

JL

>I have a larger Jet. I love the motor, spindle travel, chuck size, etc.. The table is a bit small. I've seen the smaller benchtop Jet. I like the table size on that a lot better.

Re: Drill Press recommendations

#6

Re: Drill Press recommendations *LINK*

Hank Knight from SC

>Mark,

IMHO, unless you want to spend big bucks, modern drill presses don't compare with the old ones built before, say 1950. I just completed rehabing a Walker Turner 15" bench top drill press. It it is built like a tank, simple, very accurate and it will replace my Delta floor model. They are fairly plentiful and usually inexpensive. You might have to spend a few bucks and some elbow grease getting one into shape, but its well worth it in the long run. There's one listed on the Bay now - see link below

Just a thought.

Hank


Walker Turner DP

Re: Drill Press recommendations

#7

Re: Drill Press recommendations

Bill White

>Don't overlook older, used machines. I picked up an old Craftsman (circa '52) for $125.00 several years back. Solid as a rock, and accurate (and heavy).

Bill

Re: Drill Press recommendations

#8

Re: Drill Press recommendations

David Hay @ Denver

>I have the Delta floor standing drill press. It had the largest travel and the quill lock was very nice to use. I've seen ads for a new Powermatic drill press that I'd probably take a look at if I were in the market today.

David

Re: Drill Press recommendations

#9

Re: Drill Press recommendations

Dale Hamilton

>April 14- 10% off Jet tools at the woodcraft stores. I too have the big Jet drillpress- excellect- I'll never have to buy another

Re: Drill Press recommendations

#10

Re: Drill Press recommendations _thanks

Mark Kauder, Phenix City, AL

>thanks to all for your suggestions.

I saw a Delta 17-990x this weekend. I may have to save my money for that one. Just too sweet!!

Mark