Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

painting a bench vise

Posts

painting a bench vise

#1

painting a bench vise

Dan Collins

>Friends: I am building a workbench. I bought 2 vises. The cast iron on one is green and the other is blue. I would like to paint the cast iron portions of both of them black. I am installing wood jaws on both, so the painted surfaces won't come in contact with the pieces I am clamping in the vise. Is there any special paint I should use to avoid chipping and pealing? I do not plan to try to strip off the other paint. I just want to paint over it. Thanks. Dan

Re: painting a bench vise

#2

suggestions

Bill Tindal, E.TN

>Get a can of Krylon or other spray paint. If you use these vises to make stuff their color and chips will become less important than it now seems.

I have tried all sorts of vise face protection. My preferred way is to attached with double sided tape some thin luan plywood (or something similar), I like something slightly deformable and high friction, hence the luan is better than a piece of masonite.